Share your TSHOOT v2.0 Experience

Only 3 days for the last chance to final CCNP before Cisco change new Certifications. No more time, get dump and take exam ASAP.
@Contact me to get share all (VCE, PDF, PKT, UNL) with VCE tool player and all lab sim on EVE, Packet Tracer: saaau_holo(at)yaaahoo.com (replace aaa=a)
@@@D&D
Q1: Follwing the buttom-up TShoot methods, please order from step 1 to step 4 how to solve an issue with an IP phone:
Step 1. Confirm that enough power is received by using PoE
Step 2. Confirm that the phone is on the correct VLAN
Step 3. Verify the DHCP server configuration and option 150
Step 4. Verify the configuration the file from the TFTP serverver

Q2: Drag and drop questions to correct GRE configuration: (case 1)
R1 (10.1.1.1)=============R(CA)=============R2 (10.1.2.1)

R1(config)# interface Tunnel0
R1(config-if)# tunnel mode gre ip
R1(config-if)# ip address 10.1.3.1 255.255.255.0

R2(config)# interface Tunnel0
R2(config-if)# tunnel mode gre ip
R2(config-if)# ip address 10.1.3.2 255.255.255.0

Answer:
R1:
  Configure the tunnel source to be 10.1.1.1
  Configure the tunnel destination to be 10.1.2.1
R2:
  Configure the tunnel destination to be 10.1.1.1
  Configure the tunnel source to be 10.1.2.1

Q3: Drag and drop questions to correct GRE configuration (case 2):
R1 (192.1.1.1)=============R(CA)=============R2 (192.1.2.1)

R1(config)# interface Tunnel0
R1(config-if)# tunnel mode gre ip
R1(config-if)# ip address 10.1.1.1 255.255.255.0

R2(config)# interface Tunnel0
R2(config-if)# tunnel mode gre ip
R2(config-if)# ip address 10.1.1.2 255.255.255.0

Answer:
R1:
  Configure the tunnel source to be 192.1.1.1
  Configure the tunnel destination to be 192.1.2.1
R2:
  Configure the tunnel destination to be 192.1.1.1
  Configure the tunnel source to be 192.1.2.1

@@@MCQs
Q1: B. ipv6 traffic-filter INTERNET {in|out}
Q2: A. sh ip interface
D. sh ip traffic
Q3: A. Normal network traffic experiences asymmetric routing
Q4: E. 60 permit tcp host 2002:ABC:2000:2:2::2 host 2000:ABC:20:2:2::2 eq 22
Q5: A. set the exec-timeout 0 0 command on line con 0
Q6: A. EXSTART
Q7: D. DSW-01(config)#interface gig1/2
DSW-01(config-if)#spanning-tree cost 5
Q8: A. There are different VTP domain for S1 and S2
Q9: A. Recursive routing
Q10: A. On R2, change the tunnel source to 10.1.2.1
B.On R1, change the tunnel source to 10.1.1.1

I just took the exam about 4 hours ago. 980/1000. Thank you to networktut.com. The Premium Membership was worth every penny. Thanks also to all the people who shared their experiences, methods, solutions, etc.

I just took the exam with perfect score. Thanks networktut.com for the effort. Everything here is valid but will not be useful after today.

The TSHOOT is a troubleshooting exam and CCNP is a professional level.

There are many people who do pass the exam as they understood what the exam is about and could solve it. This is expected from a CCNP and a company is expecting exact that from you if they pay your salary :)

Then there are many people who randomly ask for algorithm or perfect answers.

For those who might think it is just enough to learn prepared answers but are not able to really troubleshoot and do not understand the issues in the tickets. You have not the level to become a CCNP since your networking skills are just too weak.

If you fail with very small amount of score …. start from basic and learn basics … then better start again with CCNA or entry level but do not blame a Cisco exam for being the problem.

Study hard … do the labs … understand the problems in the tickets … you cannot fail as networktut presents you all needed informations being successful.

What is Drag and drop 1 (HSRP, virtual mac, etc.)?

yesterday I took the exam and I scored 1000, don’t be afraid of anything ,
mcq November update sill valid , 10 tickets , two simlets BGP with a different Neighbor IP.
stay calm , write down on a paper every device with it’s tickets so that you can clear your mind and mark every ticket that you’ll get.
I have got the following Tickets:

1,4,6,9,11a,12,13,14,15 and 17

Passed today with 1000/1000!
All questions from MCQ Nov/19
All tickets from this site
HSRP Simlet
BGP Simlet
24 questions
Thank you networktut!

Hey I can verify everything is okay here! Just you need to verify again and again and possibly if by using different show commands. And keep in mind the obvious like the port-sec and dhcp helper address. I can verify the correct is loopback on r4. Ignore the port-sec config if helper on dsw1 is not loopback of r4. If possible check the intf config of port-channel and it’s associated interface. ( Mostly for allowed vlan’ config) when everything at layer 2 works. For example for the premium sim where you can ping r1, means l2 is okay. For that ticket glance at the ideal l2 config of trunk and access ports

Passed the exam 1000/1000.

Total of 24 questions
-MCQ Nov update
-BGP and HSRP sim
-Tickets around 8 of them

Focus and read properly the questions. Sims are the same as here. The interface for the tickets might be quite overwhelming at first but then you’ll get used to it.

I used NULL ZERO strat, worked flawlessly. I suggest to avail the premium for practicing the sims, mcq and esp the tickets. Don’t be bothered by negative comments you read here. You’ll do just fine as long as you prepare yourself properly. 3days to goo!!

Thank you cery much networktut!!

Good luck to all that will take the exam.

passed todah with 9xx
all questions from here.
passed with premium member.
thankyou networktut

if you failed the exam recently i believe you can longer take it again. Exam official ends on 24th Feb and retake period need to wait 5 days… I was able to open a Cisco TAC for bugs – have till march31 now pending bad weather in Oklahoma no way t get to test center

This site and community looks GREAT! Is there something like that about AWS certification exams? Some years ago i found out that techs make 5K more a year w/cert

nailed it today 9xx/1000. get premium and you are good to go. i followed this man strategy

“Passed today with 1000/1000. Much many thanks to NetworkTut!!! Helped a lot, Premium membership.
I followed mine strategy, and it helped alot and trust me save me a lot of time..! (know only 2 days left.. but might help someone).

1:- ipconfig on client –> client doesn’t have IP (169.254.xx.xx) –> only 3 tickets have this –> PPI (Port-Security on ASW) (Port-Channel misconfig on ASW) (Iphelper address on DSW)

2:- ipconfig on client –> Client has IP –> Ping DG (DSW), and it fails. Layer 2 ISSUE –> only 3 tickets have this –> TVV (Trunk misconfigd on access port – ASW) (Vlan error – port should be in vlan 10) (VACL on DSW)

3:- ipconfig on client –> Client has IP –> Ping DG (DSW) OK. Layer 3 ISSUE –> Ping R1 (10.1.1.1), OK –> only in 3 tickets you can –> BEN (BGP neighbor issue) (Edge-security acl on R1) (Nat issue on R1, ip nat inside/outside)

4:- IPV6 issue, there are 3 IPV6 issue tickets. easy to differentiate.

5:- Ping from client to dsw, OK –> ping from client to R4 fails –> only 2 tickets –> PA (Passive-interface issue on R4) (AS eigrp issue on R4)

Above make 14 tickets sorted within seconds…. all you need to remember PPI, TVV, BEN and PA.
It did help me a lot.. Good luck everyone..!”

Hello,
just passed – nothing new.
BUT had technical problem: in the BGB-sim, only the Intro/Scenario was shown.
There was no button for the questions!
When klicking NEXT, the question was gone at all.
the problem was routed to VUE.

Good luck dear all

Passed today, 980, :'( (not in club 1000, it’s so pitty).
Got SWITCH, ROUTE, TSHOOT, in one month, i’m so happy !
Tshoot exam is easy if you understand networks concepts. Everything is here, thanks networktut !
my only mistake was on HSRP sim the last question i answered OSPF issue, it was DHCP.
To identify which device cause issue ping everything from PC1 from bottom to up and same from R1 to PC1. i will try to stay on this forum to answer to your questions if you have.

Hi All,
I passed the exam today – 980/100
Network Participles 67%
Layer2 Technologies 100%
Layer3 Technologies 100%
VPN Technologies 100%
Infrastructure Security 100%

All Questions valid, happy learning and labbing!!!

Best Regards,
JE

Cleared exam yesterday with 9XX.

Network Principles 100%
Layer 2 Technologies 76%
Layer 3 Technologies 100%
VPN technologies 100%
Infrastructure Security 100%
Infrastructure Services 100%

Layer 2 Technologies 76%, but really i don’t know where i made a mistake. Everything was ok in my perspective. It seems that there was too many full score before me and they refused to give my own 1000. However, i have crossed the wall, and itis the must important part. Finally CCNP R&S of last days.

You can trust MCQ, Simlet and tickets from Nov 2019. But read carefully, because they can ask you the opposite one. So, you must read the sentence until the last word.

Passed yesterday with 1000/1000
All questions from premium networktut
MCQ Nov/19
tickets
HSRP Simlet
BGP Simlet – different BGP address
24 questions
Thank you networktut

Passed today, 1000/1000. Everything from networktut (premium). This was my 2nd recert with TSHOOT and networktut :) Hope there will be something like this for new exams.

Passed yesterday with 980/1000 everything from network tut premium ..

Passed yesterday with 1000/1000
All questions from premium networktut
MCQ Nov/19
tickets
HSRP Simlet
BGP Simlet – different BGP address
24 questions

Thank you networktut

How to check certification had been renewed?

I found the easiest way was to go to youracclaim and check verification there. The Cisco website led me in circles.

I passed today 21/02/2020 with 1000 marks. There were 24 questions and all are from here. As I remember slight different was there in bgp simlet where ibgp peering as number is wrong and ebgp neighbor ip is wrong. Premium membership helped me to practice and thanks networktut. Wish all of you the best.

Hi guys, in only few days till this exam expire if there’s someone who could share their networktut acct. I’d I appreciate it. I had premium previously but it already expired and I think I needed one last review before I take the exam. Please please my email id is ms_indhie07 at yahoo com. Thanks.

Passed the exam. The Dumps and Labs from this website are still valid. Valuable advice to you guys, dont learn this stuff hardcore, use logic, use few really really usefull show commands like show ip ospf neighbors, sho interface trunk end so on. In combination with show run there shouldnt be any issues if you understand how is technology working. Thanks networktut!

I think I had one Question not in the November MCQ. It is a Question regarding IPv6 ACL and how to enable access from one to another router. The answer was to move ACL entry 60 on top of the ACL. Pretty easy because the IPv6 addresses are shown on the diagram.

Good luck guys!

That question is in the Premium material.

@Big Joe
Same here, I was expecting 100%, also got 76% in L2. There wasn’t even a slightest doubt about any of the questions or labs and I have gone through them dozens of times and knew exactly why each answer was the right one…

I just passed with 1K.
CMQ same as Nov update, same HSRP and BGP sim, and same tickets here.

: B. ipv6 traffic-filter INTERNET {in|out}
Q2: A. sh ip interface
D. sh ip traffic
Q3: A. Normal network traffic experiences asymmetric routing
Q4: E. 60 permit tcp host 2002:ABC:2000:2:2::2 host 2000:ABC:20:2:2::2 eq 22
Q5: A. set the exec-timeout 0 0 command on line con 0
Q6: A. EXSTART
Q7: D. DSW-01(config)#interface gig1/2
DSW-01(codnfig-if)#spanning-tree cost 5
Q8: A. There ase differen..