Share your TSHOOT v2.0 Experience

@Anonymous
Can you pls send me the file nhema 123 @ gmail.com

As I say, being the same case, serial interface 0/0/1 and Ip nat inside, case B. According to the premium being case b is the other answer that I have said.

Hey guys, anyone who passed or willing to share primium? I am having exam soon

Yes, both answers are in Premium with a good explanation of when each answer is applied for 4a and 4b.

R1-4 tickets
R41-4 tickets
ASW1-4 tickets
DSW1-2 tickets
IPV6-3 tickets(R2, R3 and R4)

-Figure out IPv4 or Ipv6 ticket by looking at TICKET TAB
-IPv4 go to client if IPv6, go to R2, R3, Rr4
-iPV4 if NO IP or cannot ping GW, problem is on ASW1 OR DSW1
-IPv4 if GW pining ok ping to 10.1.1.1 is ok problem is on R1
-ipV4 ping to 10.1.1.1 is not ok but ping to 10.1.1.2 ok, problem is on R1
-IPv4 ping to 10.1.1.1 is not ok or 10.1.1.2 is not ok but only GW, check DSW1
-If IPv6 you need the command #show ipv6 ospf neighbor….

hey guys
just cleared 1000/1000
all questions from here ,premium membership is worth it guys ,
was pretty easy just utilize SAM strategy of pining and for IPV6 tickets try pining from client to webserver if working ,it means its a ipv6 ticket ,at least thats how i dealt with it . and once im sure its ipv6 just go to R2 R3 and R4 to know which one is it .
Best of luck guys and thanks for everything
exam was done melbourne australia

@Copy link and paste in your browser, what are the new MCQs ?

Thank you in Advance.

they are not real.

Please ! Please help & teach me.

I knew each tickets have three question and “Done” button.
How many times we need to press “Done” button for each tickets? one? or three?

A) answer select -> press “Done” -> next question -> answer select -> press “Done” -> next question -> answer select -> press “Done” -> NEXT TICKET!

or

B) answer select -> next question -> answer select -> next question -> answer select (All three question done) -> press “Done” -> NEXT TICKET!

Please !

Hi Guys,

For answering tickets. Ex Ticket 1, you answered Q1 then Q2 and you are now in Q3 (not submitting or pressing DONE). Can you still go back to Q1 or Q2 to change your answer? Thanks!

@SHIN
OPTION B
we select each answer next question and once ur done u click done and the ticket becomes red u cant see the the question/answer anymore for that ticket and then u click next and say YES just make sure all the question for that are answered

could you please answer my question because I am confused about the tickets
I can detect the fault in any router or switch from show running configuration only ,so is it ok to use this strategy or not ???
I answer all the tickets in premium section by this strategy so is it ok or not ???

@beeru
Thanks! Thank you beeru!

Hi Just got 1000/1000
All information in this site is Valid.
MCQ’s are from Nov.2019
All tickets are valid. No HSRP Track and EIGRP AS. but I recommend everyone to view those ticket.
there are tickets that are tricky. so watch out. understand the materials given here.
Simlets are the same except BGP which has different IP but concept is the same.
Scroll down for VLAN ACL for the ticket that has vlan filter test1 vlan-list 10.
for port security, please be careful and input the sh ip int brief to make sure that int fa0/1&2 is both down… because there is 1 ticket that has port security but state is UP in bot interfaces.
Study Hard and make sure you understand the tickets.
God bless test takers…
Have a Premium account and that’s enough….

to know if the ticket is IPV6
click the ticket at the bottom right corner (not the scenario) and read the problem.
if loopback is in ipv6 format, then that ticket is about ipv6.

Hi, I’m planning to take the exam later this february 20. Just asking if I need to get premium membership or is source material from this site enough.

Also if you think that it will be helpful if i take premium, can you tell me what I can learn from there besides here.
Thanks

Done and done and passed! All valid here. It pays to be a premium.

Oh…No… Please suggest me….

I failed today 804/1000.
I failed second time and failed same score…

I met 24 quiestions

1.BGP sim
2～10.12 Tshoot Tickets
R1 OSPF Auth
R1 NAT inside/outside mistake
R2 IPv6 OSPF routing
R3 IPv6 Tunnnel34 trouble
R4 EIGRP passive-interface
R4 IGRP redistribute route-map name miss,
ASW1 inter Switch VLAN trouble
ASW1 port-security
ASW1 Access port / Trunk port trouble
DSW1 VLAN filter
11.HSRP sim
13～24 MQC (all in updated on 13th-Nov-2019)

All sim,ticket,MQC from networktut.
and I believe I’m not wrong.

but I failed…

Why???
What I was wrong??

Did you go next ticket , not press “Done” button?
No, I certainly pressed “Done”. I checked two time before next tickets.

Typed “copy run start” in BGP sim?
this command not worked.

What did you my mistake?
Please suggest for this miserables guy…

@SHIN

did you check the problem under port security if the interfaces are down, down state?
if not, maybe that ticket is dhcp problem..
in the exam, dhcp problem has port security in 2 interfaces fa0/1&2 in ASW1,
but when you type “sh ip int br” IN ASW1, int fa0/1&2 states are up,up…. so that is not the problem

Passed. All the MCQ from November, SIM and Ticket came from here. No new question. Just follow the instruction given here. Thanks to all.

@Cocomelon
Thank you for your comment.

I type “show port-sec” and I see fa0/1&2 status “err-disable” , so I think that Problem is port-security.

Thanks

Can someone who took the test recently please verify if the MCQs are solely from the November list?

Hi all
if anyone interested to swap my Tshoot premium Account(valid to after 23-Feb) with Route premium Account , please contact me by below email.

tarifi.abdallah @ gmail com

Can someone please tell me who recently done exam that the MCQ section is solely from the November set??? Please I will greatly appreciate it

Failed 801/1000
New tickets and mcq

So in the real exam, in each ticket can you go back and forth on each question before pressing done? Or do you have to press done on each question within the ticket?

Also, can someone answer @Alrighty then?

I am looking for that answer as well.

I appreciate all feedback,

Thank you

About Ticket 4:

What is correct answer of question. NAT or IP NAT?

The Fault Condition is related to which technology?
A. BGP
B. NAT
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security

Today I have similar experience to Kuru with new ticket and mcq. If you have the experience in real life this will be good for you. I have seen no mention of this tickets or mcq on networktut.

I just took the exam this morning…

everything is here..
MCQ is from Nov2019.
all tickets are just the same as here.

Need to be a premium member to practice the sim…..

Can someone tell us if there are NEW MCQ or not? don’t troll, please.