Share your TSHOOT v2.0 Experience

Passed TSHOOT exam with 1000.
BGP outcome over show ip bgp summary did not show all networks after configuration. How ever i got 1000 which means there is an error. Also the Tickets seems to be confusing if you follow theory coz there are alot of mistakes. e.g on the DHCP ticket under VLAN 10 (R4) there was passive interface configured(but i put in the ans as er DHCP). Hence there are errors on the tickets.

BUT follow SAMS flow chart you wont go wrong.thats how i did it

@ REPLACE WWW BY . to AND GET DUMPS

Do not believe the messages posted from this idiot. Seems to be postiing, every few days, that they have just passed the TSHOOT exam, with a different made up score each time.

Lots like this person is trying scam future exams takers with a fake dump.

BEWARE OF THIS SCAM ARTIST … !!!!

T-shoot Exam passed 843/1000

My labs :
DHCP Helper-address
VLAN filter
IPv6 OSPF
EIGRP Passive Interface
OSPF Authentication
BGP Neighbor
NAT ACL
hsrp active-active
paket tracer files with answers included just have to memorize correct one
serial int unnumber ptp

REPLACE WWW BY . to AND GET DUMPS
ixwwwsk/e30rL

IPv6, ping from R1:
ping 2026::1:2 KO? The problem is on R2
ping 2026::34:2 KO? The problem is on R3
ping 2026::34:2 OK? The problem is on R4

This technique helped me knock out (KO) the last 3 tickets when time was short.

Passed the test today 1000/1000. All MQC questions were from Nov. The BGP and HSRP scenarios came exactly like presented here.
For the tickets, “ping” is the “king”, and “traceroute” is your best friend for isolation. Just take your time to read carefully and be prepared to think outside the box on the spot. Just like in real life it should be.

does tracerooter wurk in the exam last i hear say no
all these 1000 posts r bogus and this guy proves it beware of asshole like this

About VACL ticket, is not true the scroll down button is difficult to see! The scroll down button is large! but is kind of transparent, I did not have any problem to see it!

yes and it says to scroll in exam directions nobody ever sees this?? leave cisca alone

nother thing there diff versions of test I did not see ipv6 written in the question did u ?

Please i need a VCE suite urgently. Please send to bestleks @ gmail dot com Thanks

@Burik,
thanks for all your time to share your experience. I think I am going to speed up and go for the exam earlier! I cant wait 2 more weeks and struggle with that…

Anyone know if we are able to run the ipconfig command on the PC-1 client during the exam?

@ REPLACE WWW BY . to AND GET DUMPS
and this moron is posting dumps for Route exam.
@Ipconfig – yes you can issue the ipconfig command on PC1
@All – NullZero strategy is simple and effective for the tickets

strategies are for the one who has no idea what are they doing

Anyone who did the exam:

Can we do traceroute (or tracert) on client1?

Can we do ipconfig /all
on client1?

Thank you for the answer in advance.

Hi all,
Will tickets on exam match ticket numbers reviewed here? say Ticket 12 on exam will be about IPv6 OSPF ? anyhow thanks for comment

Is „Ping ipv6 xxxx“ working in the Exam or do we need to use „Ping xxxx“ like here?

We can do ping 2026::111:1
We can do ipconfig on pc1

Anyone have a copy of ENCOR 350-401 OCG?

agreed so many trollers here
@woodkid last update u could never do traceroute one of the fake 1000 score asswipes posted that bull to be a dick
ipconfig/all i forgot to try that one, so dont count on it working

Anyone have a copy of ENCOR 350-401 OCG? come back in about a year or so for it

whats the chances of the MCQ’s changing soon?

@AB That’s what I am thinking as well. When I tried to check the history of all the Tshoot’s MCQ’s it appears that they are actively changing the MCQ questions since Feb 2019 then got an update again after a month Mar 2019, April, June, August, Sept till they got this Nov 2019 update. Let’s keep our fingers crossed that they will not alter or update the MCQ’s before Feb 23, 2020.

@SDS

“ip nat outside Ser 0/0/1 on R1. This ticket puzzled me a lot since DSW1 can ping the server and all other routers, only AWS1 couldnt ping server, totally misled me into thinking something was wrong with DSW1 or AWS1 config. Eventually it was R1 with ip nat inside on the link to ISP ”

Can you clarify a bit more – are you saying that this is an additional nat ticket and ip nat inside on ISP link ?

That doesn’t sound right as link to ISP should have ip nat outside as public ip is configured on that interface

am i missing something ?

Hello everybody,can you help me with these questions,I have some doubts.

QUESTION 1

Which protocol does mGRE use to determine where packets are sent?
A. CEF
B. EIGRP
C. NHRP
D. DMVPN

Correct Answer: C
Section: [none]
Explanation
Explanation/Reference:
A => C
Reference: https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/41940- dmvpn.html

QUESTION 2

Refer to the exhibit. When troubleshooting an adjacency issue on router R1, you generated the given debug output. Which two values are mismatched between R1 and its neighbor? (Choose two.)

A. hello timer settings
B. metric calculation mechanisms
C. authentication parameters
D. autonomous system numbers
E. hold timer settings
Correct Answer: BC
Section: [none]
Explanation
Explanation/Reference:BD => BC ???

QUESTION 3

Which two statements about extended traceroute options are true? (Choose two.)
A. You can change the source port that the UDP probe messages use.
B. You can change the datagram size to troubleshoot clocking problems on serial lines.
C. You can use the Strict IP header option
D. You can change the minimum and maximum TTL
E. You can use the Verbose IP header option to specify the IP address of each hop that the packet takes.

Correct Answer: CD
Section: [none]
Explanation
Explanation/Reference:
Explanation/Reference:
AD => CD
https://www.cisco.com/c/en/us/support/docs/ip/routing-information-protocol-rip/13730-ext-ping-trace.html#ext_troute

QUESTION 4

Refer to the exhibit. Your company’s security policy requires you to allow telnet access using tcp port 3033 only. You apply the configuration changes as shown and then test. Your telnet attempt fails. Which action would correct the issue?
A. add rotary 33 to the VTY lines
B. add access-list 101 deny tcp any any eq 23 to the ACL
C. remove authorization exec ITCC from the VTY lines
D. remove transport input telnet from the VTY lines

Correct Answer: A
Section: [none]
Explanation
Explanation/Reference:
D => A
Change telnet port: rotary 33 => 3000 + 33

QUESTION 5

You must connect two remote sites over the public Internet. Multicast support, security, and simplicity are required. Which tunneling technology should you consider?
A. GET VPN
B. IPsec
C. GRE over IPsec
D. MPLS

Correct Answer: C
Section: [none]
Explanation
Explanation/Reference:
A => C

QUESTION 6
Refer to the exhibit. Which outcome regarding a telnet connection to the router is valid?

A. Telnet fails because of the missing AAA on the router
B. Telnet fails because of the missing username/password on the router
C. Telnet fails because of the missing enable secret on the router
D. Telnet completes successfully

Correct Answer: D
Section: [none]
Explanation
Explanation/Reference:
B => D

QUESTION 7

Which scenario would cause the tunnel interface on a router to show a status of down/down?
A. The source physical interface is in a down/down state
B. The destination router’s physical interface is shut down
C. The shutdown command has been issued on the virtual interface
D. The destination address is missing on the tunnel configuration

Correct Answer: C
Section: [none]
Explanation
Explanation/Reference:
A => C

QUESTION 8
Refer to the exhibit.

Which statement about the INTERNET ACL is true?
A. The denied entries will be logged because of the explicit deny ipv6 any any log line.
B. A packet with a source address of 2001:DB8:AD59:ACC0:2020:882:DB8:1125 will be denied.
C. HTTPS traffic from the 2001:DB8:AD59:BA21::/64 subnet will automatically be permitted along with HTTP traffic.
D. A packet with a source address of 2001:DB80:AD59:BA21:101:CAB:64:38 destined to port 80 will be permitted.

Correct Answer: A
Section: [none]
Explanation
Explanation/Reference:
Thầy chữa ngày 30/09/2019 từ A packet with a source address of 2001:DB80:AD59:BA21:101:CAB:64:38 destined to port 80 will be permitted. Sang The denied entries will be logged because of the explicit deny ipv6 any any log line.

QUESTION 9
Refer to the exhibit.

The administrator has successfully logged into R1 but is unable to access privileged mode commands. Which configuration is causing the problem?
A. The aaa authorization reverse-access command is missing.
B. The username command uses password, not secret.
C. Enable secret or enable password must be configured.
D. The password on the VTY does not match the username password.

Correct Answer: C
Section: [none]
Explanation
Explanation/Reference:
A => C

Hello All

I will take TSHOOT soon and I am wondering on exam, does the configuration of the devices change with every new ticket? Or are all the misconfigurations present at all times. For example, will I see the NAT misconfig when checking for OSPF Authentication?

Many thanks

Also, I wonder if in the MC options for the “fix” to the problem try to trick you by giving you the answers to fixes for other tickets?

Can anybody share with me new dumps,I would be very grateful:faaarmaaanovsaaalmaaan2gmail.com(aaa=a,2=@)

Hello,

I have CCNP . How can immigrate to CCNP cloud computing certification

Thanks

@Kalodio

every ticket will be separate meaning if nat misconfig is present then you wont find OSPF Authentication issue etc

@Destroyer
It’s the same ip nat outside on S0/0/1 ticket but the DSW1 isnt supposed to ping the server, but on the exam it did and ASW1 didn’t ping the server. So it led me into thinking there was an issue with DSW1 or ASW1 and not suspect the R1 issue.

@SDS

Thanks for the tip, I see what you mean – you got ip nat outside on both interfaces for R1 – nat is incorrect so pings shouldnt work but did in the exam from DSW1

its tricky