Share your TSHOOT v2.0 Experience
| Note: The last day to take this TSHOOT 300-135 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
This article is devoted for candidates who took the TSHOOT exam to share their experience. Please tell us what are your materials, the way you learned, your feeling and experience after taking the TSHOOT v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Your posts are warmly welcome!
Exam’s Structure:
+ Some Multiple choice & drag drop questions
+ 2 Simlets
+ 15 lab-sim Questions with the same network topology (15 troubleshooting tickets or you can call it one “big” question). Each lab-sim is called a ticket and you can solve them in any order you like.
Topics of the lab-sims:
1- IPv6
2- OSPF
3- OSPFv3
4- Frame Relay
5- GRE
6- EtherChannel
7- RIPng
8- EIGRP
9- Redistribution
10- NTP
11- NAT
12- BGP
13- HSRP
14- STP
15- DHCP
The problems are rather simple. For example wrong IP assignment, disable or enable a command, authentication…
In each tickets you will have to answer three types of questions:
+ Which device causes problem
+ Which technology is used
+ How to fix it
When you press Done to finish each case, you can’t go back.
A demo of the TSHOOT Exam can be found at: http://www.cisco.com/web/learning/le3/le2/le37/le10/tshoot_demo.html
Note:
+ In the new TSHOOTv2, you cannnot use the “Abort” button anymore. Therefore you cannot check the configuration of another ticket before completing the current ticket.
+ We have gathered many questions about TSHOOT exam and posted them at TSHOOT FAQs & Tips, surely you will find useful information about the TSHOOT exam there!
Below are the topologies of the real TSHOOT exam, you are allowed to study these topologies before taking the exam. It surely saves you some invaluable time when sitting in the exam room (Thanks rrg for sharing this).
IPv4 Layer 3 Topology
IPv6 Layer 3 Topology
Layer 2-3 Topology
You can download the SAM strategy here (specially thanks to SAM who created this strategy):
https://www.networktut.com/download/TSHOOT_PING-plan-SAM.pdf
@t4ff
how did you save the bgp config?
@Daniel – you dont, just click Next
Hi,
If in the exam I just based on ping and show run commands to identify the faults in all the tickets simulation and give the correct answers, will I pass?
It seems that the system is also looking for the correct commands entered on top of correct answer because I failed marginally at 825.
Anyone can please advise?
@Student – Not sure, I did what i do in real life tshoot, ping and use show commands to give me sympotons. such as show ip route, show ip protocols, show ip int br, show int trunk, show vlan br. etc etc.
in your exam report what does it say you failed on
is the pass mark 790 like the others for tshoot?
845
I have read the info on premium member did it take anyone else a while to digest i read it and now i’m confused.
@Daniel
In BGP you only must configure, not need save configuration. it is not supported
@Anonymous
I get 1000 points. I’m very secure that the answer is D
@Anonymous, answer is D. If you look at the int status, fa1/0/1 is admin down. You need to enable this port to establish trunking.
Already passed the exam with full mark
Yes, you must check the “show run” configuration. The f1/0/1 is “shutdown”
@Teddy
which info ?
You must check the PDF of Nov2019 that include tickets. For this moment it is enough to pass the exam. In anytime could change the MCQs for that reason I took the exam.
Hey Guys,
Do you have a google drive / mediafire link with the dumps? Or what are you sending via mail? :D I thought the Nov PDF contains everything…
Hi All,
Hope you are enjoying here for your goal to achieve in your career and 9tut is helping us to achieve it. I have a confusion to clear. Please advise me if you surely know about it. I am already cleared ROUTE and SWITCH exam, but i am still waiting to clear my T-shoot exam. If any chance, I will not complete my T-shoot exam before 23rd of February 2020, so do i need to restart my CCNP exam all over again or I only study T-shoot exam? Please help me with your advice. by the way my all certificates are still valid till December 2021.
With regards
Parvez
Check
https ://www.cisco.com/c/en/us/training-events/training-certifications/certifications/professional/ccnp-routing-switching-migration-tool.html
@Parvez2020
Check out the migration tool, but the short version:
ROUTE + SWITCH =~ The new core exam ENCOR
So you have to gain one of the new concentration exams to become CCNP (Enterprise).
TSHOOT wont be around any longer.
@ ALL OF YOU. In the exam at the tickets we have to modify configuration on the device’s or it’s enough to answer the question ? the ping from client to server should work before you move to the next ticket ???
Check: https: //www.networktut.com/tshoot-faqs-tips
Hi guys, Is there any web site for CCDP Arch (300-320) like networktut Tshoot ,can you please share with me :)
gugba i already have to pass this exam 300-320 until 23FEV. Can you share your email?
does it enough know only answers or we also have to know topolgy and all confiruations for passing exam ?
The important is you can learn the topology, after you can use “ping” to solve
Hi to gugba,
Please share 300-320 dumps with me too
For 300-320 we can share information. i also need to do the exam!
Send email to amilcargoncalves91 at gmail
Sorry amilcargoncalves93 is the correct email!!
@samoo,
Please, check your inbox.
@morarica
you jsut have answer the 3 questions:
Which device has the issue
which technology has the issue
and what do you have to do to fix it
You cannot change config in tickets you just have to isolate the issue and answer correctly. The BGP simlet hoever can and must be modified.
Maverick can you send to amilcargoncalves93 at gmail
Where do i get the latest dumps? What do i need to learn .
Have just started preparing for the exams.
Someone help!