Share your TSHOOT v2.0 Experience
| Note: The last day to take this TSHOOT 300-135 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
This article is devoted for candidates who took the TSHOOT exam to share their experience. Please tell us what are your materials, the way you learned, your feeling and experience after taking the TSHOOT v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Your posts are warmly welcome!
Exam’s Structure:
+ Some Multiple choice & drag drop questions
+ 2 Simlets
+ 15 lab-sim Questions with the same network topology (15 troubleshooting tickets or you can call it one “big” question). Each lab-sim is called a ticket and you can solve them in any order you like.
Topics of the lab-sims:
1- IPv6
2- OSPF
3- OSPFv3
4- Frame Relay
5- GRE
6- EtherChannel
7- RIPng
8- EIGRP
9- Redistribution
10- NTP
11- NAT
12- BGP
13- HSRP
14- STP
15- DHCP
The problems are rather simple. For example wrong IP assignment, disable or enable a command, authentication…
In each tickets you will have to answer three types of questions:
+ Which device causes problem
+ Which technology is used
+ How to fix it
When you press Done to finish each case, you can’t go back.
A demo of the TSHOOT Exam can be found at: http://www.cisco.com/web/learning/le3/le2/le37/le10/tshoot_demo.html
Note:
+ In the new TSHOOTv2, you cannnot use the “Abort” button anymore. Therefore you cannot check the configuration of another ticket before completing the current ticket.
+ We have gathered many questions about TSHOOT exam and posted them at TSHOOT FAQs & Tips, surely you will find useful information about the TSHOOT exam there!
Below are the topologies of the real TSHOOT exam, you are allowed to study these topologies before taking the exam. It surely saves you some invaluable time when sitting in the exam room (Thanks rrg for sharing this).
IPv4 Layer 3 Topology
IPv6 Layer 3 Topology
Layer 2-3 Topology
You can download the SAM strategy here (specially thanks to SAM who created this strategy):
https://www.networktut.com/download/TSHOOT_PING-plan-SAM.pdf
I would say
D. In configuration mode, using the interface range port-channel 13, port-channel 23, then configure switchport trunk allowed vlan 10,200 followed by then no shutdown commands. interface Fastethernet 1/0/1
@Andrew
It should be D
Allow Vlan 10,20
If choose allowed Vlan none then both interfaces cannot communicate with Vlans !!
I think it’s D let’s see what other Engineers think about the answer thanks !!
Have you verified the condition of interface f1/0/1??
@andrew…. It is D, i’m so sure for that!
My opinion is that d is correct if we don’t have another answer that no shut the fa.
Yesterday I wrote that we have another solution for ipv6, how to find the correct answer. I don’t give you the answer because I don’t want to confuse you with that.
If you have learned with ping go with that.
I check both solutions, mine and ping and the results are the same.
Thank you.
Additionally, I want someone to answer Andrew about that ticket.
Someone that passe the exam with full mark points.
Here we are to help each other and no confuse. So, if someone is so sure about the answer could respond to us.
Thank you
Anyone pass the exam today?
Hi there, is the MCQ solely based on the November update (12Qs) or the entire set of MCQs?
Passed today with 923. All questions were from Nov dump. 12 tickets. Be careful as I did not see
an ipv6 address in the scenario so I had to use the process of elimination along with SAMs plan. If you study the material on this site you will pass with no problem
@SJ
Thanks for the information. I know the tickets aren’t problem, you can apply ping or SAM method, the “key” are the MCQs that could change in anytime.
Thanks for the ipconfig / all tip peeps here haven’t a clue but u do Juan Buenos Dias
Hi,
do you have to learn all MCQ’s or just november MCQ’s?
@SJ you guys need to click on the “Ticket” button for you to know the ipv6 question.
Hi
in the exam ips
10.1.1.1
10.1.1.2
10.2.1.1
are there ips are same or changed ?
thanks !!!
passed the test today with 1000. had a total of 24 questions. MCQs were all from the Nov dump. had BGP and HSRP simlets. If you pay for the premium membership and use it for studying, you should have no issues passing the exam.
@smoke
Congrats!!
Is all the IP address same as here like
10.1.1.1
10.1.1.2
10.2.1.1
Thanks!!!
What is the solution to the fault condition? is it B or D for ticket No:9??
A. In configuration mode, using the interface range port-channel 23, port-channel 24, then configure swt5itchport trunk allowed vlan none followed by commands. switchport trunk allowed vlan 10,20,200
B. In configuration mode, using the interface range port-channel 13, port-channel 23, then configure switchport trunk allowed vlan none followed by commands. switchport trunk allowed vlan 10,200
C. In configuration mode, using the interface range port-channel 23, port-channel 24, then configure switchport trunk allowed vlan none followed by commands. switchport trunk allowed vlan 10,20,
D. In configuration mode, using the interface range port-channel 13, port-channel 23, then configrure switchport trunk allowed vlan 10,200 followed by then no shutdown commands. interface Fastethernet 1/0/1
is the answer for ip address helper right ?
i saw some one says that the right answer to remove excluded 10.2.1.1 to 10.2.1.255
Route Website is Down!
Case#1
Ping
10.1.1.1 successful
10.1.1.2 Successful
10.2.1.1 Successful
Possible Trouble Tickets :
• BGP—————————————R1
• NAT ACL———————————-R1
• WAN ACL———————————R1
• IPV6 OSPF——————————–R2
• Ipv6 GRE tunnel————————-R3
• Ipv6 Ospf to RIP Redistribution—–R4
Case#2
Ping
10.1.1.1 unsuccessful
10.1.1.2 Successful
10.2.1.1 Successful
Possible Trouble Tickets :
1. IPV4 OSPF Authentication———– R1
Case#3
Ping
10.1.1.1 unsuccessful
10.1.1.2 unsuccessful
10.2.1.1 Successful
Possible Trouble Tickets :
1. Ospf and Eigrp Redistribution——-R4
2. Eigrp Passive Interface ————R4
Case#4
Ping
10.1.1.1 unsuccessful
10.1.1.2 unSuccessful
10.2.1.1 unSuccessful
Possible Trouble Tickets :
• Vlan Filter ————————-DSW1
• DHCP Helper Address ———-DSW1
• Port Security———————-Asw1
• Vlan Access————————Asw1
• Switchport Trunk —————-Asw1
• Vlan Access————————Asw1
@Toto
Thanks i think this is the best way !!!!!!
i will follow the same
thanks again
Passed! 1000/1000
Everything same as here.. BGP/HSRP sims…Tickets, And NOV13 update is still valid!
Thanks Digitaltut/Certprepare/Networktut ! (Premium ACC) ;)
for IPV6 tickets, is that clearly mentioned in the ticket that its a ipv6 ticket?
Please can anyone paste a link for Nov MCQ
There are 3 IPV6 tickets, the question will state that it is an IPV6 ticket?
Are we allowed to ping IPV6 interfaces from the client 1 for IPV6 tickets?
Thanks God and thanks networktut. I passed 980.
Bgp and hsrp sim
November mcq
10 tickets
Pay atention at new VPN mcq
@Bob https : // www . networktut . com / questions-and-answers
in most of the tickets you will find this conf
R1
interface Serial0/0/0
description Link to R2
ip address 10.1.1.1 255.255.255.252
ip nat inside
encapsulation frame-relay
ip ospf message-digest-key 1 md5 TSHOOT
ip ospf network point-to-point
—ip ospf authentication message-digest” not exist. Never!!!
but you will find it is activated under the OSPF conf
router ospf 1
area 12 authentication message-digest
only in ticket that have a ospf auth problem, you will not find it active under the sh IP opsf neighbor. be careful.