Share your ENARSI v1.1 Experience

Hi @freelife, is the questions here updated and enough for the exam to pass?

Hello guys. How many labs out of 4 are we really required to do in order to pass the exam? Considering the other questions i get them almost 80-90% right. I dont think i’ll be able to do 4 labs so just wanna know how many labs out of 4 do i need to complete in order to pass the exam.

Took exam today, failed, new lab not here, change aaa configuration, along with icmp ACL to a time period of between 0900-1800. Sim not here. Will you source it network tut?

Then! The @networktut team reported that the aaa lab has been updated to the name “Login & ACL Sim”. Now I don’t understand. Isn’t this “Login & ACL Sim” Lab the one that appears on the test? Let’s update please @networktut. Grateful.

Damn, so sorry about that @smurf. Was it just that 1 lab that made you fail and the objective questions here did you see any? I wish you good luck in your next trial

No I also had dmvpn2 vrf and redistribution/pbr which I couldn’t finish and moved on however with the lab that is not listed i guess it didn’t make the grade.

I appreciated the range of materials available. It provided a comprehensive overview of what to expect on the exam, True Cisco Dumps

Saa-c03dumps.com

@smurf alright. Thanks for the feedback man. Please help me with that redistribution lab sim. That’s my address up there

Anony
Does those dumps have the lab configs in?? If they don’t forget it!!!

Network Tut
Are you going to post the new lab? Some AAA congiv and icmp access list with time range ???

Took the exam yesterday. Failed.

46 multiple choice, 4 sims. All multiple choice are here, 3 of 4 sims here. DMVPN, VRF, Redistribution and PBR, and a new one that seemed to be asking for PBR based on a pre-existing ACL to allow telnet from the ISP to a switch behind another router.

I made mistakes on the Redistribution sim for sure, did not confirm switch to switch connectivity after VRF so that I did not run out of time. Completely bombed the new sim. was given “results pending” at the end so I might have been close to passing(?).

Can you answer Network Tut

Sounds like there are a few new sims. Are these going to be on here network Tut??

took the exam yesterday and passed.

I got the new ACL SIMS. Here’s what I remember and I hope this helps

———-
Topology:

SW1 – EAST Router – ISP – WEST Router – SW2

Tasks 1: ISP should be able to telnet SW2
– change acl direction from ISP interface facing SW2 from inbound to outbound

Tasks 2: ISP will only allow major network 192.168.0.0/16 subnets. SW1 and SW2 should be able to ping each other.
– you need to correct the ACL with “192.168.0.0 0.0.255.255” portion as it has an incorrect destination address
– change acl direction from ISP interface facing SW1 from inbound to outbound

forgot the other tasks but I think its something to do with log. I remember seeing a deny acl for log but I was not able to do something about that. you might as well focus on that acl line as well. hope this helps

Overall dumps are still good. but make sure you understand how to implement ACL and PBR

Dear Networktut, the total questions from part 1 to 7 are 517 questions, is there any possibility to make it lesser number or something like 200+ only. 517 questions is too much. Still not yet included the Lab Sims that we need to review also. kindly your support please. Thank You.

Hey mountain wood, you’re lucky that you can benefit of 517 questions! In ENCOR they are about 1000… you should want MORE questions, not less questions… the idea here is to raise odds to pass the exam in a hostile environment, not to grow lazy…

Tut
Eta on the new sim’s please

hey guys just finished taking the exam and failed. 98% of the questions are here and they are very helpful. I had 4 labs (VRF, Redistro/PBR, IPSec 2, and that brand new ACL lab). I ran out of time trying to figure out that last lab it was brutal. I don’t remember much for it but hopefully @networktut can find a way to get it and upload.

Had 4 labs(Dmvpn, VrF, redistribution and PBR,and acl which has sw1 east and other router,sw2 was talking about login or so. My premiliary score looks great but I failed the exam.. I’ll just suggest, try as much as possible to finish all your labs and don’t leave any untouched. The duration is short! So don’t waste more than 15-20mins on each lab, the next lab might be more brutal. The multi choice questions in this dump are still very much valid according to the one I had with me before my subscription expired in December, so it might not take much of your time if you studied well.

Apart from this dump site, can you guys please recommend Materials or YouTube videos to understand more on those Enarsi lab topics. Please don’t say ocg textbook, I read it all, it wasn’t helpful. I’m pained, I can’t lie.

I wish you all yet to write Goodluck and please don’t forget to share your good news when you pass, so we that failed will be motivated to write again. Hopefully, I will pass on my next trial..

And yeah, I’ve another question. I hope they won’t change the lab to a different one entirely when I retake the exam cuz I failed the first one?

@networktut – I took the exam on the 24 of Feb and failed…

I got around 5 new MCQ questions which are currently not here.

4 Labs:
-Redistribution & PBR Sim
-VRF Configuration Sim
-IPSec Configuration Sim 2
-Access-list Sim (Draft Version) – This one was posted here one day after my exam so I was not lucky.

I failed. There were 4 Labs:
– Redistribute & PBR first version, only difference was distance 255 was on R3, and not R4 and also some random crap in the show run like access lists not added to any interface and metrics on redistribute static/default information originate).
– New ACL lab, with one router, two switches (west and east) on each side, one switch had to configure login(AAA), telnet on VTY Lines. Then the other do ACL that permits only lo0 on east switch to DNS, DHCP (and something else) to an ip address on the router.
-IPSec VPN (excatly like this site also, even the IP-addresses and transform set names) and lastly
-VRF lab, also exactly like this site, IP-addresses, names etc.

Tips for folks: Really work on doing the labs really fast. There are a bunch of random crap in the show running, to make it more difficult/disorientating. On the PBR lab there were a lot of access lists that were not connected to any interface, also some random metrics on redistributed static routes etc. I wasted a lot of time on the labs because I was not that prepared and all the random crap in the show running threw me off. Before you start the exam it will be stated how many labs you will have to face.

The questions on this site are 99 % valid. I might have seen 1-4 questions that were new and not on this site.

Question regarding doing the exam again: Do you get different questions and labs? Do they keep track of that or is it simply random? Do you guys know if its possible to pass without doing the labs? Thanks in advance, and good luck to you all!

on the Redistribution / PDR lab is any of the config in there or do we need to input all of the config in the TUT Lab sim ?

@Me

There were access lists and route maps already configured. But you had to remove some access lists also because they had the same number as the correct one and were denying some subnets. Redistribution was already configured but not correctly. For example OSPF was redistributed into EIGRP without metrics. Regarding PBR the route maps were also already configured, you only had to set the next hop and configure it on the correct interface.

Thanks for the info LooseDragon

passed.

3 Labs:
-DMVPN Configuration Sim
-Redistribution & PBR Sim
-VRF Configuration Sim

There were some questions that I felt like I had never seen before.

I don’t believe the post above this one all they do is post about other dumps, TUT can you delete please?
On a different note congratulations HAJ. Did you complete all the labs I.e redis/pbr?

DMVPN lab which is coming in exam is PC1 PC2 PC3 or the 1 with IPSec ???
Also is PBR and VRF the exact 1 which is in the simlet or any difference?

Hello,
Do you know “Tab” and “?” are working on SIM-LAB in CCNP-ENARSI exam? or no?

Thanks in advance for your answer.