Share your ENARSI v1.1 Experience

@Sasuke. I did my exam the last 2 August and the questions are from all parts 1-7 and some questions from Legacy (all topics)

@Amy check in your pearson vue account your Score report

QUESTION
Which tag is used by the PE router to forward the packet to the correct customer?
A. RD
B. extended-community
C. RT
D. VNI
Does anyone know the answer?

passed
I think %90 of questions were from here there were a few questions that seemed new but it’s possible that I just forgot them
3 labs
snmp2 same as here
vrf same as here
ipsec 1 same as here

@ccnp taker, how many questions did you have and It was using Premium or free membership?

@ccnp taker, congrats ! the new questions were hard ? do you remember how many and the topic ?

There were 53 questions and I used premium membership. They are not hard if you study the questions from here but there are many similar questions that are easy to mistake so you need to be careful. I created mnemonics to not to mix them so would recommend it.

Passed today. 52q/ 3 Labs, 95% of questions are from here. The Labs are VRF, DMVPN SIM3, and Redistribution & PBR SIM 2.

Passed recently which 90% of the materials here are sufficient to pass the exam. Lab’s were VRF, DMVPN SIM3 and SNMP Sim 2.

Passed a few some weeks ago, some new questions.
3 Lablets:
VRF as here
IPSec as here
Redistribution SIM2 (???)
It’s my second try so here my experience, learn Labs, repeat N times. Redistribution SIMs 90% correct here. My opinion need to be correct all “redist.” labs.. A big problem what Lablets some times stuck, so if you think that you do everything correctly and somrthing not work (ping and etc.) Try shut/no shut interfaces espeshaly Tunnels, reapply IPsec policies.

I passed yesterday, 49 MCQs and 3 labs ( Ipsec 2, VRF and Redistribution 2). Make sure you practise the labs well, as they are embedded in the middle of the MCQs

Got about 3 or 4 new questions, nothing too serious. Thank you NetworkTut!.

Exam passed. 49 questions + 3 Lab: VRF, DMVPN and redistribution&PBR2.

Question were taken from all section + 2 new (easy) question.

@networktut: For redistribution&PBR2 LAB R3 is altready redistributing into ospf with metric-type 1 while R4 is redistributing R4 with type2.
From show ip route on R6, it was learning route to R1 loopback through external EIGRP from R4, so we need to change metric on EIGRP.

I passed my exam today

I passed my exam today, totat of 53 questions, 3 lab (SNMP, VRF both same here and 1 DMVPN that not here but if you are familiar to DMVPN this is not hard. thank you @networktut, only 2-3questions not here.

ive make sure consistency of 97% to 100% for big quiz before i took my exam since no latest update for the last 3months.

@networktut please update the questions and labs

@domeng-su congrats, could you give us more details about the new DMVPN Lab please ?
thanks

I failed my exam, so many new questions and a new dmvpn lab.

Hi DUO,

How many new questions approximately? And what was the new DMVPN lab like?

took the test yesterday, 09/23/2024 and passed.
there were 53 questions, 3 of which were lab(VRF, DMVPN 2, SNMP 2) the 3 same as here.
there were 5 new questions.

the new Dmvpn lab, had 4 tasks and task 3 had a task for mtu 1400 byte, i had only 5 questions from part 7 all others were new.

Dumps are still valid.

All of the questions were here. Had 3 labs -> VRF, SNMP 2, IPsec.

Thanks NetworkTUT team, and good luck to all of you!!!

Took the exam today and passed. Most of the questions are here. Got 3 labs: VRF, SNMP-2 and DMVPN-3. had new questions on BFD like if BFD is enabled on OSPF, where it would apply. so far i remember the options were all neighbors, only DR, BDR and not on DR other, on P-2-P links. Wish all the best to the future candidates. Thanks Networktut.

Can some one please share the updated dumps.

I passed the exam on the 29th. Most of questions are here, i had like 3 or 4 which were not here but were not too hard.
3 Labs:
– IPSEC 1: I had issues with final test ping from PC1 to PC3 (worked to PC2). Was an error with OSPF which was stucked in EXSTART/DOWN. Tried to fix it but after some minutes decided to move on since IPSEC config was OK.
– VRF: same as the one here
– SNMP 2: Same as the one here.

Good luck.

Hi, I have the exam on friday, who have the real dump for prepare the exam please!!

mi email address is carlos_rodr7910@hotmail.com

Passed my certification recently! Questions are still valid here. Got 52 MCQ and 3 sims (VRF, IPSec and Redistribution 2). Regarding the Redistribution 2, I only needed to change the RIP metric for Task 1. Metric is 7 (hops) so you”ll need to change it to 1 and that’ll avoid traffic drop. You’ll need to practice the sims a lot especially redistribution since you don’t know what you’ll get. Thanks, NTut! <3

I passed my exam today, all the questions are on this site,
Labs:
VRF
DMVPN 3
Redistribution 2
thanks NTut!!!
good luck

I passed my exam today got 53q (3 drag&drop , 3 Labs), all questions are on this site, I use premium membership
Lab:
VRF
SNMP
DMVPN

I passed my exam on 5th Oct. got 53q (3 drag&drop , 3 Labs), all questions are on this site. Got few new questions related to tunnel.
Labs:
VRF
SNMP
DMVPN

I took exam today all questions are on premium.Thanks 9tut
3x Labs
Dmvp 2
VRRF
REDISTRIBUTION