Share your ENARSI v1.1 Experience

Hi guys. I have now finished the exam, fortunately successfully. 5 or 6 questions are not in this scope. 3 labs: vrf (exactly the same), IPsec and one more that I didn’t bother to know what it was. Good luck to everyone.

Passed 51 Questions found few new ones with 3 labs VRF , SNMP 2 and IPSEC (same)
practice all labs till u get confident . every question count so grab everything don’t left any.
Good Luck all don’t giveup
Thanks @ networktut

I have a test scheduled for the end of the month, if anyone can help me with burning questions I would be grateful

e mail
titrabalhodiadia @ gmail .com

is there a latest copy of questions dump

I have questions regarding the Redistribution and PBR SIM.

I am unsure about the K value that provided by the Question in Task2. How we ordering the K value of metric when we use the redistribute command in router eigrp ? Can some one give me an example of command use on both R3 and R4 ? I want to know the best and worst bandwidth that will be used also.

Thanks.

Hi everyone, Almost I forget my experience. I passed my exam the last friday 02/08. Were 48 questions and 3 labs (vrf, and IPsec 1 the same and distribution & pbr 2 with different IPs but the same tasks). Some new questions, but were deducible, would be nice a new update of questions. I recommend practice all the labs because any of them will take between 20 or 25 mins each one easily. Good luck for all and thanks 9tut!

@KJ, The K values are ordered as such: K1 = bandwidth, K2 = load, K3 = delay, K4 = reliability, K5 = MTU. Typing “?” after the “metric” keyword will tell you what value it’s asking to input via contextual help. If you want to make R3 more preferred than R4, have R3’s K1 value higher than R4 K1 value in the redistribute command. Here’s an example of what that looks like:

R3:
!! FORMAT !! redistribute ospf {process-id} metric k1 k2 k3 k4 k5
!! EXAMPLE !! redistribute ospf 10 metric 200000 1 255 10 1500

R4:
!! FORMAT !! redistribute ospf {process-id} metric k1 k2 k3 k4 k5
!! EXAMPLE !! redistribute ospf 10 metric 100000 1 255 10 1500

In the Redistribution & PBR Sim LAB, I have redistributed using the command below on the router.

R3(config)#router eigrp 10
R3(config-router)#redistribute ospf 10 metric 100000 1 255 10 1500

R4(config)#router eigrp 10
R4(config-router)#redistribute ospf 10 metric 10000 1 255 10 1500

After checking on R6, It seems like the best path of the vice versa back to 10.1.11.1/32 is choosing the R4 instead of R5.

From the show ip eigrp topology, It seem like the FD is 281856 which is R4. And R5 is not selected.

R6#show ip eigrp topo 10.1.11.1/32
EIGRP-IPv4 Topology Entry for AS(10)/ID(10.6.66.6) for 10.1.11.1/32
State is Passive, Query origin flag is 1, 1 Successor(s), FD is 281856
Descriptor Blocks:
10.0.46.4 (Ethernet0/0), from 10.0.46.4, Send flag is 0x0
Composite metric is (281856/256256), route is External
Vector metric:
Minimum bandwidth is 10000 Kbit
Total delay is 1010 microseconds
Reliability is 255/255
Load is 10/255
Minimum MTU is 1500
Hop count is 1
Originating router is 10.4.44.4
External data:
AS number of route is 10
External protocol is OSPF, external metric is 21
Administrator tag is 0 (0x00000000)
10.0.56.5 (Ethernet0/1), from 10.0.56.5, Send flag is 0x0
Composite metric is (307456/281856), route is External
Vector metric:
Minimum bandwidth is 10000 Kbit
Total delay is 2010 microseconds
Reliability is 255/255
Load is 10/255
Minimum MTU is 1500
Hop count is 2
Originating router is 10.3.33.3
External data:
AS number of route is 10
External protocol is OSPF, external metric is 11
Administrator tag is 0 (0x00000000)

I am not sure if any initial configuration is missing ? Or any configuration in the recommendation is wrong ?

Anyway, Do we have to decrease the value of the redistribution metric on R4 to 1000 instead of 10000 ?

R3(config)#router eigrp 10
R3(config-router)#redistribute ospf 10 metric 100000 1 255 10 1500

R4(config)#router eigrp 10
R4(config-router)#redistribute ospf 10 metric 1000 1 255 10 1500

Are you studying all the Labs? There are many, it is very complicated to manage the studies of questions with all labs.

@Atenta, while it is good to study all of the labs, I prioritize the labs that everyone is posting they receive in the exam. From what I can tell, prioritize Redistribution & PBR 2, IPsec 2, VRF, DMVPN 3, and SNMP 2. Once you feel confident in those labs, you can study the others.

@KJ double check the config on R4 to see if there’s a default metric configured under EIGRP. The default may already be lower than what you configure on R3. Also, try clearing the EIGRP process by inputting “clear ip eigrp neighbor 10.0.35.5” on R3, and “clear ip eigrp neighbor 10.0.46.6” on R4. Once that’s done, run “show ip eigrp topology 10.1.11.1/32” from R6. Hopefully, clearing the EIGRP process will update the metric values and will make the route through R5 more preferable.

Will there be a new questions update soon? I’m taking the exam next week and would appreciate it as I see last update is from June, which is 2 months ago

I have a test scheduled for the end of the month, if anyone can help me with burning questions I would be grateful

e mail
titrabalhodiadia @ gmail .com

thank you very much

is there going to be update to the questions / sims soon? last one is from june

Does anyone know if the Sp0T0 questions are valid for Enarsi?

@Gao Kexin Spoto questions are valid, but maybe have some new questions until now. I bought spoto for Enarsi and appears questions from 1 to 7 part, even some questions from all topics of Legacy part. Also have between 30 new questions but all of them are deducible. I recommend if you have spoto make the comparisson of all questions and answers with 9tut.

@Andru Boy Can you help me with your questions Sp0t0?

@Gao Kexin Talk to my g mail
and.morales.san @ Gmail.com

@Andru Boy, Forwarded…

@Andru Boy ?

(repost since I posted on the wrong place)
I failed the exam.
There were about 50 questions with 3 sims(VRF, DMVPN3, Redistribution&PBR2). All sims were the same as here.
I scheduled to retake exam. As I looked at recent posts here, I am planning to prepare for sim with VRF, DMPVN3, Red&PBR2, SNMP1, IPsec2 10 for the remaining time before the exam.
I will be great if someone here could share recent exam experience, especially on sims. Than

Does anyone who has recently taken the test know if Drag Drop drops a lot, and how much of a media drop does this drop have?

Anonymous, where can I find the labs to practice them?

Anonymous, where can I find the labs and how many questions did you have?

Does anyone know about Drag Drop Questions, if they are falling a lot?

Anyone who have given the exam recently, do you know if the “show run” command works in exam?

@Anonymous Did you study part 1 to part 7?

@Noa, I took the exam a couple months ago (retaking again soon). Yes, you can use “show run” in the sims. I have used “show run | section …” to parse out the running-config that I am looking for, and that worked successfully.

@NARUTO & @CCNA, the drag drops are part of the question pool, so it is random how many drag drop questions anyone would get.

@Quique, the labs are available under “=== Lab Sims for ENARSI v1.1 ===”. You need to purchase the Premium to access the lab material. When I took the exam, I had about 50 questions and three sims: Redistribution & PBR 2, IPsec 2, and VRF.

From my experience, the labs are the same as what is available here. IP addresses may be different, but the processes and instructions are the same.

Did any one passed the test recently ? is the questions 1-7 still valid ?

Has anyone received pending as result? I gave my exam and it says pending. What does that mean? Did I fail or pass???