Share your ENARSI v1.1 Experience

Had my exam a few days back.
As far I can remember all questions and labs are here (or with some minor changes). As always great job team networktut.

Unfortunately I failed because of problems with the test center (Catastrophic resolution of the console, given time was not 140, just 120, problems with keyboard, etc.), then run out of time. no chance to get a voucher for another try…

Totally agree with @briandy, @Jonatron89 and @sigh

@anonymous do let us know which labs came up for your exam.

Attempted the exam today. 52 question one drag and drop and 3 labs VRF, Redistribute & PBR and IPsec conf came up. 90min given for the exam. most of the pictures were distorted, when doing the labs noticed that although correctly typing code I have been getting errors had to type it few times before it accepted, questions are still valid. Sadly, I failed today, however it was a race with time and don’t event have time to read the questions property. it ‘s ridiculous

Hey all that passed or ready to pass,

how long did it take you to prep here?.. I am recert and it usually takes me about 2 months or less prep time here…

also… (maybe same question) but how much time DAILY or weekly did you need to pass it?

Thanks

HI,

Any Premium member plz answer,
i am going to buy the dump zoon,plz any premium member tell me is this dump up to date?

Passed the exam yesterday, 48 questions and 3 labs. The labs were VRF (exactly the same as here), Redistribute & PBR_2 (exactly the same as here), and DMVPN v2 (with some changes). In the spoke, the tunnel is configured as a regular GRE with ‘tunnel destination 192.168.1.2’ (hub IP). You need to remove it and do ‘no tunnel destination 192.168.1.2’ and ‘tunnel mode gre multipoint’. I also have OSPF configured so I need MULTICAST DYNAMIC on the HUB and that’s it. That problem I was worried about that, but it was easy.
And the third lab was about the 10th question from the end. I gave up after doing the best I could with the intention of finishing the remaining 9 questions in 5 minutes. Someone asked about time allocation, You should be able to complete 50 questions in 30 minutes. The remaining 60 minutes would be allocated to the lab, but I still didn’t feel like I had enough time if I had to do the ping verification as well.

Hello All

Could you please show me the link to register for premium here ?

@ Mozem1234 – look in the upper right corner of this web site.

Just passed on my second attempt. 52 questions and 3 labs. VRF, IPSEC Version 2 and Redistribution PBR 1 second option in where R2 loopback 1 reaches to R5’s loopback 1 by following the path through R2, R4, R6 to R5.

About 5 new questions that I don’t remember.

My advice to you all is, practice practice practice these labs. I got stuck on the IPSEC v2 but luckily found my error and got it working. On GNS3 I was doing the labs in 5 to 7 mins but the exam is a different monster since you’re running against time and nerve get in the way. I finished the exam with 8 minutes to spare. Don’t give up, just study and lab a lot and you’re be fine.

Finally got my CCNP. Thank you network tut!!!!

would anyone please know if any of these labs can be accessed downloaded on GNS3

i passed the exam today. i got 49 mcq and 3 labs — Redistribution & PBR , VRF and IPSEC (the format is the same but the values are changed so please study the tasks carefully). for mcq i got 5 new questions out of tut bank some of the questions are tricky so read carefully before answering. but overall, big thanks to networktut !! :) and good luck to everyone who will take the exams later..

Does anyone know if the questions here on 9Tut have a good percentage on the test?

@DinoBaggio

Do You still have the same problem with the SW image?
You need to load a license in the eve-ng CLI, I have that problem and fix it with this vídeo

https://youtu.be/7HjVJpapstE?si=q326sS6S50dauk0T

Hey I downloaded the ENars dump a few years ago through a link a user shared, mine’s Oct. ’21, can someone please tell me where a link is for a newer one? Would appreciate

@Andru Boy Is all good, works as designed.

@all Is there anyone attending the Exam this week ? I would appreicate any feedback about the labs.

I failed the exam this morning. :(
I had 3 labs: DMVPN Sim3, PBR Sim2, and VRF.
I had 52 questions mostly similar to NetworkTut.
I completed all the labs with successful pings.
After the exam, I went back check on NetworkTut, and I have noticed that many questions were from Part1 and Part 2 which I had not focused on. That was my mistake.
I am planning to retake it in 2 weeks before I forget what I have already learned.
It was a good experience to confirm that most of the question are here.

Passed the exam on 12/7/24

I had 3 labs: DMVPN sim 2, PBR Sim2, and VRF(Same as here)

All questions here.. be cautious on time.

Pass my Exam today, I got 50 q + 3 labs.

Labs was: SNMP, VRF and DMVPN same as here.

Consentration question were in Copp section, MPLS, and redistribution.

Good lucky guys.

There are several versions of labs, for example for DMVPN, there are 3;
Which lab should we revise? (Same for some labs)

Hey I asked for a link to get the ‘new’ doc with the Q’s…a couple years back I did premium but got tagged bad…almost whacked me, so I’m super leery of doing it again. My list of ENARSI Q’s is from Oct. ’21, but I got it from a link…is the only way to get it now through premium?

Hello people who have recently passed this exam,

Does anyone know if show run command works in the exam?

show run command works in the exam, tab works as well

Passed my exam today, at first it was status pending and after 3 hours pearsone VUE emailed me that the result are final.

– 52 multiple questions ( only 1 out of tut database but it was easy)
– 1st lab Redistribution & PBR Sim but the one with RIP thats at the end. (exaxctly the same)
– 2nd lab Ipsec lab 2 (exactly the same)
– 3rd lab VRF (exactly the same)

The paper results that I got:

VPN technogloies: 8x%
Infastractute Security: 9x%
Infastracture Services: 9x%
Layer 3 Technologies: Pending

The exam time is 2 hours & 30 min for non native english speakers. I finished and had 50min left

Gl to all

Hi guys,
Im taking the exam on 2nd Ago. I have an important question.

The questions in the section “ENARSI 300-410 v1.1” also enter in the exam ?

Good Luck to all

Hello all

Pass the exam yesterday.

3 labs / 50q
vrf :same
dmvpn: asked (1)for nhrp authentication and (2)from phase 1 to phase 2 change
SNMP: similar to the v2 (SNMP host exist in initial configuration).

3 new Q, one regarding tos (something about the precedence values), one routing and one CoPP.

questions from all the spectrum (part1 to part7), !!do not leave anything outside !!

Thanks @ntut

GL to everyone

Passed the exam on 24/7/24

I had 3 labs: DMVPN sim 2(changed IPs), PBR Sim2(same as here), and VRF(Same as here)
49 Questions, all but 1 are available here

Thank you

I had Exam two days back and it was unsuccessful due to lack of preparation for LABS . Wish to retake in coming week .

Labs – VRF , IPSEC , Redistribute SIM 2 ( very similar to here )

I cannot access the networktut website since yesterday.

Just had the exam today and passed.
Part 1 to 7 still legit.
Had vrf , dmvpn v2 and redistribution pbr2
All the same als what is here.
Thank you networktut.

Hi guys, could you send me the enarsi lab please elton. amorim @ hot mail .com