Share your ENARSI Experience
February 4th, 2020
Go to comments
The new ENARSI 300-410 has come to replace the old CCNP exams so we create the “Share your ENARSI Experience” for everyone to share their experience to prepare for this new exam.
Please share with us your experience to prepare for the new ENARSI 300-410 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: To get the new CCNP Enterprise certificate, you need to pass the ENCOR 350-401 exam (core exam) and one of the concentration exam.
Your posts are warmly welcome! Hope you will find useful information here!
what are the ios used for the eve-ng labs? routers and switches wont start
I’m facing the same problem when i try to run the labs using eve-ng community, It gives me the following error:
failed to start node (12).
UPDATE: Passed!! Thanks @networktut – these sites have allowed me to grow my career, can’t thank you enough.
@nbean @anon2023 – that error indicates that you don’t have the required Cisco IOL node images required to run the labs / start the nodes. This really should be explained here somewhere as I wasted hours setting everything up just to realize I don’t have the required images. You need a license to download them through normal means. I never got it working. I just typed out the commands from the labs on here over and over again until I could do it from memory.
congrats JayMay, I was able to setup the lab with many workarounds, I agree with you that it has to be described in someway, can you please share your experience? which labs did you face ?
and what about the MC Qs ? was it from the last NEW INARSI Qs?
Do you know of a website for Fortinet or Palo Alto?
Thanks
dear community , how do i obtain the questions and lab?
Thanks @ networktut!
I have compeleted my exam yesteday and this site helps me a lot.
guys, please take care of the lab, you have to save every config on time othrewise it will make you to config now and then.
I will wish good luck for all of you!!!!!
@ate
Labs?
Congrats @ate would you please notice which labs did you encounter ?
Juste passed my exam today. About 3 or 4 New questions. I got 3 labs : the VRF with BGP lab, the DMVPN with IPsec and OSPF with auth.
Thanks Networktut !
For those who passed or are studying to & have bought premium…
Did you study all of the New ENARSI Questions Parts or just the latest one (i.e. Part 6)?
@JayMay I feel your pain – Eve-NG unl labs are great to practice with but do require images and licensing. To top it off, Eve-NG requires a license to run Pro/LearningCentre versions (community version is free though). Also, Eve-NG does not support any technical issues if your images are not legit (bought from Cisco).
This is why I use PNET labs, they’re an unofficial fork of Eve-NG and they support the UNL lab format (Pro and Learning Centre features also). Here the big reveal – it is 100% free (I do donate whenever I can). Once you load your IOL images (download from dl.nextadmin.net/dl/EVE-NG-image/ or search on Pirate Bay), the PNET system can easily license IOL and correct access permissions (which is the real reason it is so hard to get Eve-NG work). I have personally tested the bulk of the Eve-NG UNL labs provided on NetworkTUT in PNET Labs. Let us know in the forum if you get stuck and let’s get these labs working for you!
@jollyrogerfu – Hey Buddy, you need to do all of the questions on this site (10x times over). You want to walk with the big boys now right?
I’ve just passed the exam,overall 56 Qs including the 3 labs, got 4-5 new questions that are not familiar, got 3 Labs DMVPN, CoPP, new BGP lab which is mentioned under the chapter BGP Configuration Sim (Draft Version) couldn’t solve it because I had no time.
Thanks every one and thanks networktut i wish goodluck for all.
@anom2023
the BGP lab similar to BGP ( Draft )
@anom yess! the same but here there is no enough info about it. i guess the labs section is not weighted in the exam and if evaluated it would give the same score as a normal MCQ
@Anon2023 do you remember the new questions?
@JayMay – I would suggest you use P N E T L A B S instead of E V E – N G . Works for me.
Just passed the exam.
Everything is in here. All question, and labs vrf, bgp,ospf.
Thanks Networktut.
@Bomber in first congratulations :) in second, the labs you talk about are “OSPF Configuration Sim”, “BGP configuration sim”, etc… this is my first time studying here
@nuto_14 yes, i got the BGP lab and I skipped it immediately. I did the VRF, OSPF, and CoPP same as networktut.
I passed the exam recently. All the question were similar to the ones reported here. I found the exam pretty simple. I found 3 labs: BGP (as here), OSPF (as here), COPP (as here). If you prepare for the exam with the question from here I suggest you to double-check the answers. Good luck to all!
I will be renewing my CCNP, is ENSARI enough to renew my CCNP or I need to take the ENCOR?
I took the test today and passed. All questions were here on the site. The labs were CoPP Configuration Sim, DMVPN Configuration Sim and BGP Configuration Sim. Thanks networktut.
I took the exam and failed, I have seen many comments that dumps are valid but in my case it was not like that, only 50% with luck.
Did you complete ENSARI 1-6?
Hello, I did complete all the modules, the only thing that was the same was the drag and drop, anyway, it’s the same for the exam, but don’t trust yourself, I’ve read many comments that say it’s the same, but the truth is in my case it was not so.
Do we have any information if new questions have appeared? G_alex mentions that only 50% appeared from ENARSI parts!
@NetworkTut Can you give us an answer?
@g_alex did you by premium?
Awaiting someone confirm if premium still valid to renew