Share your ENARSI Experience
February 4th, 2020
Go to comments
The new ENARSI 300-410 has come to replace the old CCNP exams so we create the “Share your ENARSI Experience” for everyone to share their experience to prepare for this new exam.
Please share with us your experience to prepare for the new ENARSI 300-410 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: To get the new CCNP Enterprise certificate, you need to pass the ENCOR 350-401 exam (core exam) and one of the concentration exam.
Your posts are warmly welcome! Hope you will find useful information here!
During the simulations, does the “tab” and the “?” work like in normal simulators?
@CoffeeJoe, yup, it works.
@JD Thank you !
Does anyone hv idea wat the redistribute lab contain
Hey, Appreciate all the good updates.. I have a UK exam booked for this Friday so if anybody before then has an further updates (Surprises) then i’d appreciate that also. Thanks
I took the exam yesterday and passed.
52 questions
48 multiple-choice questions (All MCQ questions from network Tut)
4 lab exercises
There is a new lab that includes RIP, EIGRP, and OSPF. (PBR) Please take note of that.
Thanks @pollo – I will feed back my experience today.
Do you feel that passing the labs or not affected your score?
Also meant to ask could you remember which of the D&D question their were?
@Exam-Friday-UK
D&D
the LDP features
the correct order on the right to configure a policy to avoidfollowing based on the normal routing path.
“Another one that I don’t remember but is in the Networktut questions.”
“I completed all the labs; I’m not sure if they affected the exam score. Practice the ones available in the premium zone, and you will do them without any problem.”
good luck
Thanks – I fully prepped (Well as much as possible) and will deal with the updates as expected :) ..Appreciate the feedback
@pollo is that lab related to redistibution (RIP,OSPF,EIGRP)?
Just completed the exam but still waiting for outcome – 90 mins, 53 questions, x4 LAB, x1 D&D
All questions from here but with some minor tweaks and i think 1 or 2 new questions.
D&D was PBR running order so nice and simple.
LABS: 49 + 4 labs – 90 mins is not long enough!!
COPP from here, completed config, tunnel on Primary router would not come up.. All looked good to me so left it at that.
BGP – Was very poorly worded but the premise is the ISP routing is not be redistributed and you must figure out why – no clear tasks just figure it and go. I removed an inbound RM from routers 4 &5 to allow the ISP loopbacks to be received and I setup the LP requirements on R6. Looked ok to me but didnt have time to test. LP requirement was default+6 so 106.
DMVPN 1 – Smaller updates to spokes for holdtime, auth cant remember what else.
DMVPN 2 – Full setup of Spokes IP NHRP MAP/Dynmaic/NHS/Holdtimer/Auth + Tunnel key, MTU MMS_Adjust and tunnel protection.
I completed all 4 labs to what I believed was required but I really didnt have time to test or then even troubleshoot as i only finished with about 2 mins to spare.
Good Luck.
The Total questions from Part 1 – 6 here in Networktut is 349 questions, just want to ask if there is less questions that are already converted in PDF file? Thank You
@Exam-Friday-UK, Thanks for the information, Was the D&D the one were there are 6 steps ?like configure set commands, configure ACLs, etc. ?Thanks.
@RickCR – Yes thats the one
@Exam-Friday-UK So have they inform you wether you pass or fail.
It kinda sucks that they leave you hanging like that.
NEW OSPF-EIGRP redistribution Sim. as I know:
ISP1 ISP2
V
R1 ————–R3—————I
I I I
I OSPF I EIGRP R5
I I I
R2 —————R4————–I
I
R9 – RIP
task 1:
R5 can not ping 10.99.99.9 on R9
Solution:
R4#conf t
rip 10
distance 85
task 2:
Traceroute now goes from R5 to R2 in this way: R5>R3>R1>R2
Traceroute should go from R5 to R2 in this way: R5>R4>R2
metric K1, K2, K3, K4, K5 are given.
Solution:
R4#conf t
router eigrp 10
redistribute ospf 10 metric? K1 K3 K4 K2 K5
Pay attention that K2 should be before K5.
This is the topology. (Replace the dots with space)
…………….ISP1 ISP2
……………………V
R1 ————–R3—————I
I………………….I………………..I
I…….OSPF……..I…….EIGRP….R5
I………………….I………………..I
R2 ————-R4—————-I
…………………..I
………………….R9 – RIP
You must know the mask of /12 subnet somewhere in the tasks.
@Telegram
Thanks for sharing this to us. I am guessing this is redistribution sim that some are talk about or it could be some whole new LAB.
Based on infomation provide i making some guess
– TASK1 R5 can not ping 10.99.99.9 on R9
I am guessing that just alter AD of RIP on R4 to value lower than eigrp AD of 90. Guessing the redistribution of RIP to EIGRP is pooch or something on R4.
TASK 2 :
Traceroute now goes from R5 to R2 in this way: R5>R3>R1>R2
Traceroute should go from R5 to R2 in this way: R5>R4>R2
I am guessing the suboptimal route is just because only R3 is doing redistrbute between OSPF and EIGRP and no mutual on R4.
@Telegram, what do you mean by ‘I’ in the diagram? Thanks
I took the exam yesterday
Then when can i check my score? And where?
@Anonymous
From what i remember exam does not provide a score anymore.
It just tell you pass or fail. Then a simple breakdown of how many % you get for each topic.
Alhamdulillah
I have taken the exam today and I’m passed
Thanks Networktut , premium is enough to pass it
Mohd ayoub can you please tell’s us number of simlets and is they differs from ones here. Thank’s.
@CoffeeJoe
I can not insert a photo about the topology. so I used “I” for vertical cable between two rotuers
@4 lab sims
Copp
VRF
ospf
Eigrp
All labs from tut
@thanks
@Mohd ayoub, which OSPF sim you faced if you remember? Here we have 2 sims with OSPF.
Is premium version worth it here? I dont know if I want to pay 80 bucks for the practice questions from cisco and I have signed up for the exam a month from now.