Share your ENARSI Experience

Is there any sim questions on ENARSI？ Or is it only normal questions plus drag and drop like the dump.

passed the test
only three new questions. I took the exam in South Korea. not North Korea
See you in 3 years
good luck

@glory bk , congrats thanks for the update bro

Is a current ENARSI .vce file available for download?? (March/April 2022)

Is there a .vce file in addition to the .pdf file with q & a????

Guys can you tell mi what the correct answer is of this question

R6 should reach R1 via R5>R2>R1. Which action resolves the issue?
A. Increase the cost to 61 between R2-R3-R1
B. Increase the cost to 61 between R2 and R3
C. Decrease the cost to 2 between R6-R5-R2
D. Decrease the cost to 41 between R2 and R1

my answer is D. What is your choice ?

@drieks
why D?
still not preferable, the path will go r2>r3 bro. the questions says R5>R2>R1,lowest metric is preferred. So increasing the metric of R2 to R3 by 61 will make it 81. Now R5>R2>R1 satisfy the path.

@Tinker you are correct B is correct

@Anurag BajajAp congrats! we appreciate if you share it with us brother. thanks and cheers!

Hi , Pls anyone tell me if premium dump is update or not yet (10-apr). Tks..

bro premium is not valid because it has incorrect answers

Hi Mann @ Phil

can you share me your email id .

We will discuss the exam questions.

I just passed yesterday my Enarsi. got 100percent in vpn and infra but layer 3 and Security is so bad. I know you guys waiting for the update but the questions here is valid and all came up the same.
I took the exam on Asia country. Only 1 new question and i still remember it. As i recall its like: Office A is connected to Office B, router 1 and router 2 using ospf and eigrp, Ospf received the adverticements but eigrp cannot. The answer was: specify the seed metric. :) only 1 q. Goodluck and cheers!
I’ve been here for a month, till nexts time!

I´am totaly frustrated. Failed the test now again.
All Questions were from here, only 1 new and 1 D&D i´dindt see here.
Sorry @networktut but your answers must be wrong. Can not be that i passed here the last 30 times or more and in the exam with the same questions it is not good enough? sorry guys but if you want to passed use other dumps or wait till networktut will update

Hi Phil,

Do you remember that new questions 1 new and 1 D&D

Refer the below link and compare the answers

https : // drive dot google dot com / drive / folders / 12U1GYJWhM – hMy1KTOBx3T _ 1D8Q5uz5kz?usp = sharing

Hi Phil,

If you remember all the questions, Please highlight in dumps.

We will crosscheck the answers

https : // drive dot google dot com / drive / folders / 12U1GYJWhM – hMy1KTOBx3T _ 1D8Q5uz5kz?usp = sharing

Guys passed my exam today.

My advice double check the answers on the website Examtopics.
The dump is still valid.

have a nice day

i’m out

Hi guys
I just took the exam today.
The new question was 2~3 and it was not difficult to resolved
as you know, networktut’s dumps have a low hit rate.
you will only be able to pass if you memorize 100% of networktut’s questions
Infrastructure Service : 100%
VPN Tech : 100%
Layer3 Tech : 70%
Infrastructure Security : 67%

Is the Ensld section of this store valid? Glad to see some sections still going well here

Someone assist here, whats the answer
ip sla 10
icmp-echo 10.1.1.10
timeout 2000
threshold 2000
frequency 40

ip sla schedule 10 life forever start-time now
!
track 1 ip sla 10 reachability

An engineer configured IP SLA to monitor a next hop on a router for reachabilty.When the next hop is unreachable,the router is executing tracking and failing over another route,but packet loss is experienced because the reachability is flapping.Which action resolves this issue?

A)Increase the frequency of the sla probe to 60
B)Append delay up 0 down 0 to the track command
C)Append delay up 60 down 60 to the track command
D)Increase the timeout of the sla probe to 6000

Hi Tinkar and end of exam,

Can you share your dumps. It’s useful for exam preparation.

I found a new D&D Question.

Drag and drop a role of IPv6 first hop security device from the left onto the correct explains on the right.

===========leftside===========
A.host
B.router
C.monitor
D.switch
===========rightside===========
1.Receives router advertisements from valid routers and no router solicitation are received.
2.Receives router solicitation and sends router advertisements.
3.Receives valid and rogue router advertisements and all router solicitation.
4.Received router advertisements are trusted and are flooded to synchronize states.
===========================
I think the answer is below.Is it correct?
A – 1
B – 2
C – 4
D – 3

Hello @Matango

I think it’s

A – 2
B – 1
C – 4
D – 3

Someone assist here, whats the answer
ip sla 10
icmp-echo 10.1.1.10
timeout 2000
threshold 2000
frequency 40

ip sla schedule 10 life forever start-time now
!
track 1 ip sla 10 reachability

An engineer configured IP SLA to monitor a next hop on a router for reachabilty.When the next hop is unreachable,the router is executing tracking and failing over another route,but packet loss is experienced because the reachability is flapping.Which action resolves this issue?

A)Increase the frequency of the sla probe to 60
B)Append delay up 0 down 0 to the track command
C)Append delay up 60 down 60 to the track command
D)Increase the timeout of the sla probe to 6000

I think the answer is C.
easons: the delay up 60 down 60 command prevents a change in state of the track for a time interval of 60secs. The probe frequency is 40 secs so at least two probes must show no connectivity before the track changes state.

@Usar Please send me a PM I’m working in a full dumps with VCE.. mi email is daniel dot ma dot 2701 at gmail dot com

Matango and usar
I think the answer is:
A -1, Host: can only receive RA from valid routers no RS will be received
B -2, Router: can receive RS and send RA
C -3, Monitor: receive valid and rogue RA and all RS
D- 4, Switch: RA are “trusted” and “flooded” to synchronize states

Suggest you search for Cisco Live Session Presentation BRKSEC-3200 and look at slide 14

I passed the test today on the second try. Im based in US. All 3 latest questions were in my test. Please note that the dump is valid and I only got one new question. However, not all the answers on this site are correct. I say that because I was consistently getting 100% on the composite tests. This is how I think I passed, I took the big composite exam 10 times and made sure to get 100%, this should give you enough to pass.

Layer 3 Technologies 78%
VPN Technologies 100%
Infrastructure Security 68%
Infrastructure Services 100%

@usar
Could you explain about your answer?

I think hosts send only RS not RA.

The destination address in router solicitation messages is the all-routers multicast address(FF02::2), so hosts do not receive RS.

https://www.cisco.com/c/en/us/td/docs/routers/asr903/software/guide/ip/16-12-1/b-ip6b-xe-16-12-asr900/m_ip6-neighb-disc-xe.html#concept_A6BC20B5A1644780B2054FF3451C9A39

Hi RIp,

What are the D&D questions in the exam?

can you share D&D questions ?

@at00001b
Thanks for your explanation.
I understand it very well.