Share your ENARSI Experience

I took an ENARSI on 21st March in Tokyo, Japan, and passed.
TBH, only 3 new questions came up during the exam but they were rather easy ones.
The rest of the Q&As were the ones I’d already seen here as a premium member.

Dunno if it still is but at least one thing I could say for sure is that the dumps
were valid in Asian regions although some other premium members were
beginning to report that they failed cus more than 2-30 new Qs coming up.

This didn’t happen in my case and I passed.
I thought Cisco integrates their test database and once they update their test bank,
the new Qs were immediately added to their test center globally, but it doesn’t seem it is.

Therefore, if you really want to pass this exam with no stress, I’d recommend you to sit for the exam in any Asian nation such as Philippines, Thailand, Singapore, Taiwan, South Korea, or Japan.

Just passed the Exam, only 2 new questions everything else was from this website, mainly route summmary OSPF and one with EIGRP where there is no le or ge options.
Strange is that I got really bad score eventhough all the questions are on this site. I studied the Cisco Official books, watched CBT nuggets and used the practice questions here.
Section Analysis
Layer 3 Technologies71%
VPN Technologies100%
Infrastructure Security75%
Infrastructure Services93%

Could be also that the answers here OR on the dumps are not fully valid.

Thanks to the Networktut Team for all their efforts.

dump is not stable. failed. new questions. got 6x 8x 5x 7x cant say how many new but say 10-12 new. i feel i should have pass

fail today on 3rd

Hi all, PASSED MY Exam since few hours using Sarah materials, all the questions are the same on the exam.

@Larry Where can i find the dump

be carefull of these fake scammers who r saying dump is valid. wait for genuine comment guys

@mann bro did you use this dump ? and still saw new questions? are you certain ?
where are you from btw?

i used premium bro. recollected few question topic…route map questions, ipv6 adv in MSP, a mutual redistribution exhibit. i will say 8-10 new questions. i got 60, 80, 50, 80

@mann Where are you from bro?

ENARS1_Mar_2022, New ENARSI Question 4, Question 16 – given answer C

A network administrator successfully logs in to a switch using SSH from a RADIUS server.
When the network administrator uses a console port to access the switch, the RADIUS server
returns “shell:priv-lvl=15” and the switch asks to enter the enable command. When the
command is entered, it gets rejected. Which command set is used to troubleshoot and resolve
this issue?

1. Only answers A and C allow for SSH access via the vty lines so the answer is one or the other.

2. By default aaa authorization is disabled on the console line. To enable it you must use
the aaa authorization console command in global-config mode. Both B and C show this issued
in line con 0 config mode so both are incorrect.

3. Finally what you trying to authorize is a shell so the command – authorization exec should
be used, answer A.

So I think that all the given answers are wrong but that answer A is the least wrong.
Please comment if I have misunderstood some point.

New questions, answers please. And those who took the exam recently, you got these questions?
1)An engineer configured BGP between two routers and received a %TCP-6-BADAUTH:No MD5 digest from[peer’s IP address]:11003 to [local IP 179 ERROR meesage].Which action resolves this issue
A)Remove GP MD5 authentication from the router
B)Configure matching BGP authentication on both routers
C)Configure the BGP password on neighbour routers
D)Remove the BGP password neighbour routers

ip sla 10
icmp-echo 10.1.1.10
timeout 2000
threshold 2000
frequency 40

ip sla schedule 10 life forever start-time now
!
track 1 ip sla 10 reachability

An engineer configured IP SLA to monitor a next hop on a router for reachabilty.When the next hop is unreachable,the router is executing tracking and failing over another route,but packet loss is experienced because the reachability is flapping.Which action resolves this issue?

A)Increase the frequency of the sla probe to 60
B)Append delay up 0 down 0 to the track command
C)Append delay up 60 down 60 to the track command
D)Increase the timeout of the sla probe to 6000

Which IPv6 security feature blocks all trafic from an IPV6 host when initially connecting to a switch port except for traffic to gain an IPv6 address and discver IPv6 neigbors?

A)IPv6 DHCP Guard
B)IPv6 RA Guard
C)IPv6 Source guard
D)Ipv6 Destination Guard

QUESTİON
R1#
router ospf 1
redistribute rip subnets
network 131.108.1.0 0.0.0.255 area 2
network 131.108.2.0 0.0.0.255 area 2
distribute-list 1 out
!
access-list 1 permit 132.108.4.0 0.0.0.255

Refer to exhibit.The R1 OSPF neigbor is not receiving type 5 external LSAs for 132.108.2.0/24 and 132.108.3.0/24 networks.Which configuration command resolves the issue?

A)access-list 1 permit 132.108.0.0 0.0.3.255
B)access-list 1 permit 132.108.4.0 0.0.3.255
C)access-list 1 permit 132.108.0.0 0.0.1.255
D)access-list 1 permit 132.108.2.0 0.0.0.255

!
router eigrp 1
redistribite ospf 100 route-map ospf-to-eigrp
default-metric 2000 2000 255 1 1500
default-metric 2000 2000 255 1 1500

!– Output suppresed

!
route-map ospf-to-eigrp deny 10
match tag 6
match route-type external type-2

!
route-map ospf-to-eigrp permit 20
match ip address prefix-list pfx

!
route-map ospf-to-eigrp permit 30
set tag 8

Refer to the exhibit.Which action fixes the OSPF routes redistribution into EIGRP?
A)Set tags before matching into EIGRP

B)Match external type to type-1

C)Match OSPF and EIGRP IDs

D)Set a default metric in the route map.

@Harry
Respect Harry.
In which country did you take the exam?

i am from india

Thanks Usar for the questions, @networktut any timeline as to when the new questions will get added?

Didn´t know what´s wrong but i failed today in germany again.
Most Questions from here, only 4 new one. Only 1 D&D. Same from here.

I´am sure i answered the questions like here in the big composite quiz and passed here the last times. Are Maybe the Answers wrong here?

and @Sarah and Anonymous how can you know how much % you got?
personvue and cisco didn´t show it anymore

@Phil you can trace your score at CCIE tracker just enter your Cisco ID/pass and you will see your previous exam scores. Sad bro, but dont lose hope just keep on going. Are you sure that you get exactly the same questions from the premium here? and did you encounter the new questions posted by @usar above? thanks for your responce.

@mann i see bro, from previous comments i read that some regions has different delivery of examinations. They say Asian countries are safe to take, only 2-3 new questions. I am not sure also i will figure out so soon. I cannot wait anymore, I’m suffering reading all stuff you know haha

do not trust any short links as the admin already mentioned that at the bottom of the page.

Premium is still valid but with a lot of wrong answers, especially in L3 Technologies and Infrastructure Security domain. Do not memorize the answer blindly but understand them. Compare the answer with other sites/forums.

Admin here should do their job for premium users but unfortunately, they didn’t. There are many wrong answers in L3 Technologies domain and Infrastructure Security domain.

Communities here should also help to verify the answer together instead of leeching without contributing.

With everyone’s help, passing the exam would be more easier.

Sorry about that @Phil and as @TInker said, do not lose hope, soon you’ll ace this test

@Phil Some answer are wrong.

@phil confused too. confused with the % section how can fail :/

@networktut
I’m going to take an exam this evening.
If there is anything to update, please do as soon as possible.

@AM and all CCNP aspirants,

To my surprise, your score result is almost the same as mine.
Section Analysis
Layer 3 Technologies 76%
VPN Technologies 100%
Infrastructure Security 71%
Infrastructure Services 93%

As he said, only a few new questions everything else was from this networktut.com site, mainly route summary or redistribution of OSPF, EIGRP, i/eBGP combo where you need to brain calc the seed metric.

Before taking the real exam, I’ve prepared myself with 100% score wherever I take the big composite quizzes. But to my horror I got a really bad score on 2 sections “Layer 3 Technologies” and “Infrastructure Security”, which means that something is still wrong with the current dump for those two sections.

So, if you really want to pass this exam, be sure to have a deep understanding and have an eye for those two sections what is right or wrong.

Thanks networktut anyway, this site still helps us a lot even it doesn’t update almost for 3 weeks with new Qs.
Still useful if you leverage yourself to 100% result with the big composite quiz anytime you take.

Good luck @BK.

Guys the Questions are the same, but some of the answers are wrong. So do your research;)

Passed guys from Italy,
All the question comes from the premium member.
Only 3 new q.
Good Luck