Share your ENARSI Experience

Agree with JJ i passed with 932 dump are still valid i have seen 3-5 new questions in my exam

JJ;what were your answers to these three new questions?

@Z ,My answers are 1.a 2.c 3.c. When you see the exact questions ,you will know what are the answers. Btw, I got 50% discount by using cisco live 2021 code.You can Google it and apply the discount code.Even if you have already scheduled the exam,just cancel the exam . Register the exam again and apply the discount code.

The exam discount code is CLCGlobal21.Register the exam from 16 Feb 2021 to 1 April 2021.Exam can be taken from 16 Feb 2021 to 16 May 2021.

@JJ that code doesn’t work on Pearson Vue. Anyone actually know any ways of getting the exam cheaper?

The answer doesn’t match the description. Any ideas?

Which two actions restrict access to router R1 by SSH? (Choose two)

A. Configure transport input ssh on line vty and remove sequence 30 from access list 100
B. Configure transport output ssh on line vty and remove sequence 10 from access list 199
C. Remove class-map any from service-policy CoPP
D. Remove sequence 10 from access list 100 and add sequence 20 deny tcp any any eq telnet to access list 199
E. Configure transport output ssh on line vty and remove sequence 20 from access list 100

Answer: A E

Explanation

To only allow SSH to R1, we have to:
+ Deny Telnet in ACL 100 because the action of class-map: PERMIT is “permit”
+ Permit Telnet in ACL 199 because the action of class-map: ANY is “drop”

But:

+ In ACL 100 there is a permit statement for Telnet traffic “20 permit tcp any any eq telnet (5 matches)” which is not correct so we must remove this statement.
+ In ACL 199 there is an ACL statement “10 deny tcp any eq telnet any (50 matches)“. This statement is aimed for Telnet traffic leaving R1 which is not correct so we must remove this statement.

Note:
+ The command “transport output telnet ssh” allows telnet and SSH from this device (to other devices).
+ Telnet is TCP port 23.
+ When using Telnet on source port, it affects Telnet traffic leaving from R1.

@JJ Thanks for the heads up, will give the code a try :)

@OC, Please search from youtube and type “cisco exam discount 2021”. You will see a few videos ,they will show exactly how to get 50% exam discount step by step. Just follow the instructions to get 50% discount. If you had already paid for exam , (no worries) just cancel the exam and re-register again. they will refund the nearly full amount within 3 to 4 days later.

Dear all i need dump please i plan to take the exam next week anmarjasem61@ gmail.com

hello everyone, i need valid dump 300-410 for take exam next week. if you have the dump please share to me ardigalih00@ gmail.com . thank u

Please share me the latest dumps pdf. I am taking exam next week sytotham @ gmail . com Thank you

Guys, the new code for 50% discount is CLGlobalEvent21… as @JJ said, if you have already paid for the exam just cancel and they will refund your money in a couple of days, then you schedule your new exam using the discount

Hi JJ, did you correct any questions from premium tut or learn as it is ?

@OC, for the question regarding limiting SSH to R1, I would say the answers are A and C. The ACL information is largely a red herring. The is that A sets “transport input ssh”, which means it doesn’t matter what the ACLs later do for telnet, it’s not getting allowed. The second part of option A is just meaningless and meant to throw people off.

You need C though because the class-map any is dropping all IP traffic and since there isn’t an option to adjust the 199 ACL correctly, it should just be removed outright.

Confirmed this with a test setup in CML.

Do you have a vce for CCNP – ENARSI?

Dump is mostly still valid. Passed exam this week, however several new questions. This vid has all of the new questions I encountered: https://www.youtube.com/watch?v=Z3BaeM8ULsg

Going through each question in this vid, vs the networktut dump, there are 22 new Qs in the vid, that are not in the dump

@JJ the new code is CLGlobalEvent21 – it worked. Thanks so much!! Time to knuckle down..

hi .. I passed exam yesterday…all q from this site except 3 new

Is it okay to take ENARSI first, then ENCOR?

Passed.. still valid 9xx.. Couple of new Qs nothing really that different from here.
There was one with ACL for routing, just look for the correct “IF” out on the diagram.

Also thanks JJ for the Cisco exam discount 2021 (had to login from Cisco Live site to be valid).

Good luck!

the discount code has worked for me, i had to pay only USD 157 for the exam using the code….can anyone help me that which sims/labs are mostly included in the exam if there are any…

passed exam now dump is valid thanks everyone

Hi Guys, just passed with 9xx. Seriously if you’re getting 95%+ on the big tests consistently then you’ll defo pass. I brought mine forward from 30th March to now as i was doing well on the tests.

Had approx 3 new questions, about redistribution of BGP. If you know your redistribution, you will be fine – not too complex.

I also used JJ’s half price code, CLGlobalEvent21. I think you have to go through Cisco’s website to make it work, so search 50% off cisco exams in youtube and it will tell you how to do it.

Finally a CCNP. I’d defo recommend knowing your stuff before doing the exam just for those few extra questions, but realistically you could still pass with these questions alone.

See you in 3 years!

exam voucher sold out :(

Passed the exam today. Dumps here are still valid. Make sure to review new questions. Encountered 1 new question not found here, related to ip sla.

Hi Guys, Passed with 9xx. No new questions. These questions are more than enough to clear your exam.

Passed the exam a while ago with 9XX. this site really helps! I encountered 1 Q about BGP formation using MD5, not sure if it is counted question.

How many questions on the most recent valid dump? What is the latest one?

I passed with 9xx – before 3 hours ago ,dump are still valid i have seen 2-4 new questions in my exam

NEW Questions :

Which two actions resolve the issue? (Choose two.)
A . Configure the crypto isakmp key cisco address 0.0.0.0 on R2 and R3.
B . Remove the crypto isakmp key cisco address 10.1.1.1 on R2 and R3.
C . Change the mode from mode transport to mode tunnel on R2.
D . Configure the mode from mode tunnel to mode transport on R3.
E . Configure the crypto isakmp key cisco address 192.1.1.1 on R2 and R3.

AB

an engineer must configure a cisco router to initiate secure connection from the router to other devices in the network kept failing. which two actions resolve the issue (choose two )

B. configure a domain name
D. configure transport input ssh command on console

BD

Drag and Drop :-

Configure ACls
Configure Route map instances
configure match commands ……

DHCP massage’s DHCPACK , DHCPNAK …..

MPLS VPN device type

Label Switch Router VS Label Edge Router ….

Vty 0 vs Vty 1 …..

Best of luck …..

Hello Guys,

Looking for some help with Dumps. please help…
email: alone lover 420 at gmail dot com