Share your ENARSI Experience
February 4th, 2020
Go to comments
The new ENARSI 300-410 has come to replace the old CCNP exams so we create the “Share your ENARSI Experience” for everyone to share their experience to prepare for this new exam.
Please share with us your experience to prepare for the new ENARSI 300-410 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: To get the new CCNP Enterprise certificate, you need to pass the ENCOR 350-401 exam (core exam) and one of the concentration exam.
Your posts are warmly welcome! Hope you will find useful information here!
@YourMom Can you please share the answer of the new question to me?
@networktut I renewed membership beginning of year hoping updates would be in place now they are I have lost access please renew/extend as exam approaching, how do I contact you???
passed with 946 dump valid
@raul can you please tell me which answers you used for question 1 and 8?
Because there’s still a discussion going on. I believe the answer to 1 is D and question 8 is B and E
network is discovering a cisco catalyst 9300 and a cisco WLC 3504 in cisco DNA center. The 9300 is added successfully but is receiving the error “uncontactable” when the administrator tries to add it in cisco DNA center. Which action discovers and resolves the issue?
A. Copy the .cert file from cisco DNA Center on the USB and upload it to the WLC 3504
B. Delete the WLC 3504 from cisco DNA center and add it to cisco DNA center again
C. Add the WLC 3504 under the hierarchy of the catalyst 9300 connected devices
D. Copy the .pem file from the cisco DNA center on the USB and upload it to the WLC 3504
If you passed the exam with this answers, can you please tell us which answers you used for question 1, 2 and 8?
network is discovering a cisco catalyst 9300 and a cisco WLC 3504 in cisco DNA center. The 9300 is added successfully but is receiving the error “uncontactable” when the administrator tries to add it in cisco DNA center. Which action discovers and resolves the issue?
A. Copy the .cert file from cisco DNA Center on the USB and upload it to the WLC 3504
B. Delete the WLC 3504 from cisco DNA center and add it to cisco DNA center again
C. Add the WLC 3504 under the hierarchy of the catalyst 9300 connected devices
D. Copy the .pem file from the cisco DNA center on the USB and upload it to the WLC 3504
the answer is D (Copy the .pem file from the cisco DNA center on the USB and upload it to the WLC 3504)
Please can anyone be so kind to post the answers to the questions here? It will be very much appreciated. Thank you
@girly get the premium if you want that
Is there a lab in the exam?
No there is no lab in the exam
Now Is dump valid ?
Hi Guys,
exam passed today with 9XX. Dump is valid (with new questions in membership premium).
Study and good luck!
Congrats Rox! Do you remember which answer you gave on question 1 ? (B or D)
@Raul Which question do you refer? About snmp? In this case, in my opinion the correcr answer is D: “Configure correct authentication and privacy passwords using SNMPv3 authPriv”
During the exam have you seen this question?
Int GE1/0/13
switchport trunk allowed vlan 30-33
switchport mode trunk
int GE1/0/23
switchport trunk allowed vlan 30-33
switchport mode trunk
Refer to the exhibits. An engineer identified a Layer 2 loop using DNAC. Which command fixes the problem in the SF-D9300-1 Switch?
A. spanning-tree loopguard default
B. spanning-tree portfast bpduguard
C. spanning-tree backbonefast
D. no spanning-tree uplink fast
Sure i I got the answer wrong, cause i didn’t remberer the object
network is discovering a cisco catalyst 9300 and a cisco WLC 3504 in cisco DNA center. The 9300 is added successfully but is receiving the error “uncontactable” when the administrator tries to add it in cisco DNA center. Which action discovers and resolves the issue?
A. Copy the .cert file from cisco DNA Center on the USB and upload it to the WLC 3504
B. Delete the WLC 3504 from cisco DNA center and add it to cisco DNA center again
C. Add the WLC 3504 under the hierarchy of the catalyst 9300 connected devices
D. Copy the .pem file from the cisco DNA center on the USB and upload it to the WLC 3504
the answer is D
the correcr answer is D: “Configure correct authentication and privacy passwords using SNMPv3 authPriv”
During the exam have you seen this question?
Int GE1/0/13
switchport trunk allowed vlan 30-33
switchport mode trunk
int GE1/0/23
switchport trunk allowed vlan 30-33
switchport mode trunk
Refer to the exhibits. An engineer identified a Layer 2 loop using DNAC. Which command fixes the problem in the SF-D9300-1 Switch?
A. spanning-tree loopguard default
B. spanning-tree poigrtfast bpduguard
C. spanning-tree backbonefast
D. no spanning-tree uplink fast
What’s the answer to these, guys?
Q1
*there is a pic above and the config is below it*
Int GE1/0/13
switchport trunk allowed vlan 30-33
switchport mode trunk
int GE1/0/23
switchport trunk allowed vlan 30-33
switchport mode trunk
Refer to the exhibits. An engineer identified a Layer 2 loop using DNAC. Which command fixes the problem in the SF-D9300-1 Switch?
A. spanning-tree loopguard default
B. spanning-tree portfast bpduguard
C. spanning-tree backbonefast
D. no spanning-tree uplink fast
&&
Q3
ip sla 10
tcp connect 10.1.1.1 80
ip sla schedule 10 life 30 start time now
Then has a topology with 3 routers in the same ospf area and bgp setup. Off hanging to the bottom left is a 4th router. It has the IPs that are in the question.
Refer to the exhibit. A user has set up an IP SLA probe to test if a non SLA host web server on IP address 10.1.1.1. I do not remember what its checking if it accepts but then ask. Which actoun should the network administrator recommend for the probe to succeed?
A. Modify the ip sla schedule frequency to forever
B. Add icmp-echo command for the host
C. Add the control disable option to the tcp connect
D. Re-issue the ip sla schedule
Passed today with 9xx. Question in premium are valid. There are about 5 new questions.
@Anonymous – 5 new questions that are here in the dump?
5 sounds right. I had 21 new questions and NetworkTut has posted 16 of them.
full updated ques
I got new questions about 10-12 it risk for exam I passed by 830 score
@satomi new questions are out of 21 updated questuions?
Passed with a score of 9xx. I encountered 3-4 questions not in the New questions part 2 and they were also not mentioned by YourMom. New drag n drop regarding equivalence class, new ACL question, new question regarding aaa authentication. But this dump provided by Networktut should be enough to make you pass. Kudos to Networktut and YourMom!
Hello brother, any update question per today?
@Johnny. What topic is “equivalence class.”?
Premium version is valid enough to clear. But, like Johnny said earlier there will be 3-4 new ones but still expect to get enough marks. Alot of redistribution, ACLs, and Layer 3 questions. Good luck!
Hello YourMom,
Can you please share the 3-4 new questions
Hello, please share if you have any new dump question.