Share your ENARSI Experience

@Nnetworktut any update on this???
The dumps premium is valid ..????

I gave test and failed questions are not valid :(

@Pappo Badmash, have you paid for premium account?

@networktut we going to have another exam update from cisco before we even get this one!please give an update here on the platform for the benefit of everyone

I saw some questions not included in the quiz, can anyone confirm that they were on the exam.
Examples:

What destination addresses does EIGRP use when feasible? (Choose two.)
A. IP address 224.0.0.9
B. IP address 224.0.0.10
C. IP address 224.0.0.8
D. MAC address 01:00:5E:00:00:0A

You just discovered that a ping packet sent from one of the devices to another took a different path in the return than it did on its way to the destination. What behavior caused this?
A. Windowing
B. Global synchronization
C. MSS
D. Asymmetric routing
E. MAC address 0C:15:C0:00:00:01

The OSPF database of a router shows LSA types 1, 2, 7, and 3 default router only. Which type of area is this router connected to?
A. stub area
B. totally stubby area
C. NSSA totally
D. NSSA

Which three IP SLA performance metrics can you use to monitor enterprise-class networks? (Choose three.)
A. Packet loss
B. Delay
C. bandwidth
D. Connectivity
E. Reliability
F. traps

…
Which access list entry checks for an ACK within a packet header?
A. access-list 49 permit ip any any eq 21 tcp-ack
B. access-list 49 permit tcp any any eq 21 tcp-ack
C. access-list 149 permit tcp any any eq 21 established
D. access-list 49 permit tcp any any eq 21 established

You are implementing WAN access for an enterprise network while running applications that require a fully meshed network, which two design standards are appropriate for such an environment? (Choose two.)
A. A centralized DMVPN solution to simplify connectivity for the enterprise.
B. A dedicated WAN distribution layer to consolidate connectivity to remote sites.
C. A collapsed core and distribution layer to minimize costs.
D. Multiple MPLS VPN connections with static routing.
E. Multiple MPLS VPN connections with dynamic routing.

Which task do you need to perform first when you configure IP SLA to troubleshoot a network connectivity issue?
A. Specify the test frequency.
B. Enable the ICMP echo operation.
C. Schedule the ICMP echo operation.
D. Verify the ICMP echo operation.

Which two features are provided by EIGRP for IPv6? (Choose two.)
A. Backbone areas
B. SPF algorithm
C. Partial updates
D. Area border router
E. Scaling

What happens when two EIGRP peers have mismatched K values?
A. The two devices are unable to correctly perform equal-cost routing.
B. The two devices fail to perform EIGRP graceful shutdown when one device goes down.
C. The two devices fail to from an adjacency.
D. The two devices are unable to correctly perform unequal-cast load balancing.

And more…

I made the exam today and failed, then i bought premium after to check what i did wrong.
To my suprise there are alot of questions missing, and i haven’t gotten alot of value out of premium.
So i can confirm, there are alot of new questions in this exam.

@premium member also saw those questions but dont know if are the real ones

@talumba is useless to continue to write posts, I wrote that before 29 nothing comes out!!!
I took the exam and passed it, it was not easy because there are 15 new questions (DNA, redistribution, ACL, BGP and MPLS), but if you have studied you pass.

Hi Guys

I want to purchase the premium as i am going to write soon when will it be updated ???

Thanks

Anyone beside nibbit took the exam recently?
Premium is still good?

Hi, passed exam today. new questions from ACL, DNA (3-q’s), redistribution from ospf-eigrp, BGP, MPLS. 25-27 new questions

please share premium dump shamim.pblho @gmail.com

Hi, passed exam with questions on DNA (3-q’s), redistribution in ospf&eigrp, mpls, bgp

Hi, @shamim sent mail for discussion

I need to start

I just passed my 300-410 today with the minimum passing score, out of 63 questions there is around 20 to 30 new questions which is not in the dumps questions, if only study dumps should be hard to pass the exam, must study redistribution, netflow, snmp, policy-map and etc.

Tips: study netflow like how to configure netflow setting commands, mutual redistribution eigrp, ospf, apply access list, route-map instance, match and set sequence, snmpv3 noprivauth vs snmpv3 priauth knowledge. There is quite a lot of scenario question like how to solve the issue and etc, so be prepared. Good luck

Hi All, how many questions came up in the exam? thanks

Anyupdate on the Premium

@BJ, can you pls check your email and reply

Hi,

I want to know if having a premium account is not enough to get the exam.
If that is not enough, I want to know what to do about it.
Those who obtained the exam and had a premium account how to prepare for the exam, what they read in addition, useful links, etc.
If we develop this information we could all get the exam.
If we post irrelevant information, then we will have a big problem in the exam.
I propose to classify the new questions different from the premium account and to study them.

@Nnetworktut: can you please let us know if there is any visibility on when we can have the latest questions?
Meanwhile can I have a membership freezing period till the questions are updated?

anyone got the exam recently? Is the dump valid? Have you seen the questions above in the exam?

Thanks

@Frank I test tomorrow. I will update you all with the new questions on here and the new question section

when will the new questions be available?

@Anonymous Kindly if u can share with us new questions.

Passed with 8xx, this site is not 100% valid and will not get you a pass but it does cover a good portion of the questions so it is worth getting. I will post everything I remember here shortly. FYI none the questions that Premium Member posted above are on the exam.

Do your research to determine your own answers.

Q1
*there is a pic above and the config is below it*
Int GE1/0/13
switchport trunk allowed vlan 30-33
switchport mode trunk

int GE1/0/23
switchport trunk allowed vlan 30-33
switchport mode trunk
Refer to the exhibits. An engineer identified a Layer 2 loop using DNAC. Which command fixes the problem in the SF-D9300-1 Switch?
A. spanning-tree loopguard default
B. spanning-tree portfast bpduguard
C. spanning-tree backbonefast
D. no spanning-tree uplink fast

Q2
Topology with 3 routers.
ISP1 (AS65402) 209.165.201.1 <> R1 (AS65401) 209.165.201.2
ISP2 (AS65403) 209.165.201.5 <> R1 (AS65401) 209.165.201.6
R1
int GE0/0
ip address 209.165.201.2 255.255.255.252
int GE0/1
ip address 209.165.201.6 255.255.255.252
router bgp 65401
bgp log-neighbor-changes
redistribute static
neighbor 209.165.201.1 remote-as 65402
neighbor 209.165.201.5 remote-as 65403
ip route 209.165.200.224 255.255.255.224
ip route 209.165.202.128 255.255.255.224

Refer to the exhibits. A company with autonomous system number AS65401 has obtained IP address block 209.165.200.224/27 from ARIN. The company then was assigned block 209.165.202.128/27 from ISP2. An engineer in ISP1 reports that they are receiving ISP2 routes from AS65401. Which configuration will fix the issue?
A. access-list 10 deny 209.165.202.128 0.0.0.31
access-list 10 permit any
router bgp 65401
neighbor 209.165.201.1 distribute-list 10 out

B. access-list 10 deny 209.165.202.128 0.0.0.31
access-list 10 permit any
router bgp 65401
neighbor 209.165.201.1 distribute-list 10 in

C. ip route 209.165.200.224 255.255.255.224 209.165.201.1
ip route 209.165.202.128 255.255.255.224 209.165.201.5

D. ip route 0.0.0.0 0.0.0.0 209.165.201.1
ip route 0.0.0.0 0.0.0.0 209.165.201.5

Q3
ip sla 10
tcp connect 10.1.1.1 80
ip sla schedule 10 life 30 start time now
Then has a topology with 3 routers in the same ospf area and bgp setup. Off hanging to the bottom left is a 4th router. It has the IPs that are in the question.

Refer to the exhibit. A user has set up an IP SLA probe to test if a non SLA host web server on IP address 10.1.1.1. I do not remember what its checking if it accepts but then ask. Which actoun should the network administrator recommend for the probe to succeed?
A. Modify the ip sla schedule frequency to forever
B. Add icmp-echo command for the host
C. Add the control disable option to the tcp connect
D. Re-issue the ip sla schedule

Q4
DND to configure a policy to avoid following packet forwarding based on the normal routing. (These are the options not the correct answers.) It gives steps 1-6.
Configure route map instances
configure set commands
configure fast switching for PBR
configure ACLs
configure match commands
configure PBR on the interface

Q5
IPv6 question about not being able to SSH. You will have topology with 3 routers and an access list config. Be sure to read up on how to read an access list as I do not remember the IPs lol
A. Modify line 10 of the access list to permit instead of deny
B. Remove line 60 from the access list
C. Modify line 30 of the access list to permit instead of deny
D. Remove line 70 from the access list.

Q6
An engineer configured access list NON-CISCO in a policy to infuence routes.

route-map PBR, deny, dquence 5
match clauses:
ip address (access-list): NON CISCO
set clauses:
policy routing matches: 0 packets, 0 bytes
route-map PBT, permit, sequence 10
match clauses:
set clauses:
ip next-hop 192.168.1.5
policy routing matches: 389202995 packets, 222006352077 bytes

What are the two effects of this route map configuration? (choose two)
A. Packets are dropped by the access list
B. Packets are forwarded using normal route lookup
C. Packets are forwarded to the default gateway
D. Packets are not evaluated by sequence 10
E. Packets are evaluated by sequence 10

Q7
Theres a topology with 4 routers. R1, R2, and R3 are all connected to each other in a triangle. R4 hangs off R2 (R4 doesnt matter). You will be given the routing table. Do not have it memorized, but the key is to look for the IP address that is in question.
Refer to the exhibit. All the seriel links between R1, R2, and R3 have the same bandwidth. Users on 192.168.1.0/24 (R1) network report slow responses on network 192.168.3.0/24 (R3). A traceroute is run on the path, it shows that the packet is getting forwarded via R2 to R3 although the link between R1 and R3 are up. What can the network administrator do to fix the slowness.
A. Change the administrative distance of eigrp to 5
B. Remove the static route on R1
C. Add a static route on R1 using the next hop of R3
D. Redistribute the R1 static route to EIGRP
Note. there is a static route that is making the traffic go the way it currently is.

Q8
login block-for 15 attempts 10 within 120
login on-failure log
login on-success log
archive
log config
logging enable
logging size 300
notify syslog
snmp-server enable traps syslog
snmp-server host 172.16.17.1 public syslog

Refer to the exhibit. The administrator can see the traps for the failed login attempts, but cannot see the traps of successful login attempts. What command is needed to resolve the issue?
A. Configure logging history 2
B. Configure logging history 3
C. Configure logging history 4
D. Configure logging history 5

Q9
R1# show policy-map control-plane
control plane
service-plane input: CoPP
class-map: PERMIT (match-all)
50 packets, 3811 bytes
5 minute offered rate 0000 bps
Match: access-group 100
class-map: ANY (match-all)
210 packets, 19104 bytes
5 minute offered rate 0000 bps, drop rate 0000bps
match: access-group 199
drop
class-map: class-default (match-any)
348 packets, 48203 bytes
5 minute offered rate 0000 bps, drop rate 0000 bps
match: any

R1#show access-list 100
extended IP access list 100
10 permit udp any any eq 23 (100 matches)
20 permite tcp any any eq telnet (5 matches)
30 permit tcp any eq telnet any (10 matches)

R1#show access-list 199
extended IP access 199
10 deny tcp any eq telnet any (50 matches)
50 permite ip any any (1 match)

R1# show run | section line vty
line vty 0 4
login
transport input telnet ssh
transport output telnet ssh

Refer to the exhibit. Which two actions restrict access to router R1 by SSH? (choose two)
A. Configure transport input ssh on line vty and remove sequence 30 from access list 100
B. Configure transport output ssh on line vty and remove sequence 10 from access list 199
C. Remove class-map any from service-policy CoPP
D. Remove sequence 10 from access list 100 and add sequence 20 deny tcp any any eq telnet to access list 199
E. Configure transport output ssh on line vty and remove sequence 20 from access list 100

Q10
What are two functions of LDP?
A. It advertises labels per forwarding equivalence class
B. It is defined in RFC 3038 and 3039
C. It uses forwarding equivalence class
D. It must use resource reservation protocol
E. It requires MPLS traffic engineering

Q11
Theres an exhibit with R1 and R2. Both are in OSPF and EIGRP.
Refer to the exhibit. A network administrator configured mutual redistribution on R1 and R2 routers, which caused instability in the network. Which action resolves the issue?
A. Set a tag in the route map when redistributing EIGRP and OSPF on R1, and match the same tag on R2 to allow when redistribuing OSPF into EIGRP
B. Set a tag in the route map when redistributing EIGRP and OSPF on R1, and match the same tag on R2 to deny when redistribuing OSPF into EIGRP
C. Advertise summary routes of EIGRP to OSPF and deny specific EIGRP routes when redistributing into OSPF
D. Apply a prefix list of EIGRP network routes in OSPF domain on R1 to propagate back into the EIGRP routing domain.

Q12
How are MPLS layer 3 VPN services deployed?
A. The RD and RT values must match under the VRF
B. The RD and RT values under a VRF must match on the remote PE router
C. The import and export RT values under a VRF must always be the same
D. The label switch path must be available between the local and remote PE routers

Q13
Exhibit with 2 routers connected.
R1 (AS100) Lo0 10.1.1.1/32 e0/0 192.168.1.1 <> R2 (AS200) Lo0 10.1.1.2/32 e0/0 192.168.1.2
R1
router bgp 100
neighbor 10.1.1.2 remote-as 200

R2
router bgp 200
neighbor 10.1.1.1 remote-as 100

The neighbor relationship is not coming up. Which two sets of configurations bring the neighbors up? (choose two)
A. R2
ip route 10.1.1.2 255.255.255.255 192.168.1.2
router bgp 100
neighbor 10.1.1.2 ttl-security hops 1
neighbor 10.1.1.2 update-source loopback 0
B. R1
ip route 10.1.1.2 255.255.255.255 192.168.1.2
router bgp 100
neighbor 10.1.1.2 disable-connected-check
neighbor 10.1.1.2 update-source loopback0
C. R2
ip route 10.1.1.1 255.255.255.255 192.168.1.1
router bgp 200
neighbor 10.1.1.1 disable-connected-check
neighbor 10.1.1.1 update-source loopback0
D. R2
ip route 10.1.1.1 255.255.255.255 192.168.1.1
router bgp 200
neighbor 10.1.1.1 ttl-security hops 1
neighbor 10.1.1.1 update-source loopback 0

Q14
What are two functions of IPv6 source guard?
A. It works independent from IPv6 neighbor discovery
B. It denies traffic from unknown sources or unallocated addresses
C. It blocks certain traffic by inspecting DHCP packets for specific sources
D. It uses the populated binding table for allowing legitimate traffic
E. It denies traffic by inspecting neighbor discovery packets for specific patterns

Q15
An engineer configured SNMP noticiations sent to the management server using authentication and encryption data with DES. An error in the response PDU is received as “UNKNOWNUSERNAME, WRONGDIGEST”. Which action resolves the issue?
A. Configure correct authentication and privacy passowrds using SNMPv3 authNoPriv
B. Configure the correct authentication password using SNMPv3 authPriv
C. Configure the correct authentication password using SNMPv3 authNoPriv
D. Configure correct authentication and privacy passowrds using SNMPv3 authPriv

Q16
An engineer configured a cisco router to send reliable and encrypted notifications for any events to the management server. it was noticed that line notifications messages are reliable but not encrypted. Which action resolves the issue?
A. Configure all devices for SNMPv3 traps with priv
B. Configure all devices for SNMPv3 informs with auth
C. Configure all devices for SNMPv3 informs with priv
D. Configure all devices for SNMPv3 traps with auth

Q17
Netflow question. Make sure you understand how to configure netflow when it comes to destination address vs destination port.

Q18
Topology with 3 routers. LA. Chicago, and NewYork.
This is the config in the Chicago router.
router ospf 1
redistribute eigrp 100
router eigrp 100
redistribute ospf 1

After the configuration, the LA router receives all the NewYork routes but it does not receive any LA routes. Which configuration will resolve the issue?
A. router ospf 1
redistribute eigrp 100 subnets
B. router eigrp 100
redistribute ospf 1 metric 10 10 10 10
C. router ospf 1
redistribute eigrp 100 metric 20
D. router eigrp 100
redistribute ospf 1 subnets

Q19
A question in regards to the routers stuck in exstart. What will resolve the issue?
A. Configure to match the OSPF interface speed and duplex settings on both routers
B. Configure to match the OSPF interface unique IP address and subnet mask on both routers.
C. Configure to match the OSPF interface network types on both routers
D. Configure to match the OSPF interface MTU settings on both routers

Do your research to determine your own answers.

Q1
*there is a pic above and the config is below it*
Int GE1/0/13
switchport trunk allowed vlan 30-33
switchport mode trunk

int GE1/0/23
switchport trunk allowed vlan 30-33
switchport mode trunk
Refer to the exhibits. An engineer identified a Layer 2 loop using DNAC. Which command fixes the problem in the SF-D9300-1 Switch?
A. spanning-tree loopguard default
B. spanning-tree portfast bpduguard
C. spanning-tree backbonefast
D. no spanning-tree uplink fast

Q2
Topology with 3 routers.
ISP1 (AS65402) 209.165.201.1 <> R1 (AS65401) 209.165.201.2
ISP2 (AS65403) 209.165.201.5 <> R1 (AS65401) 209.165.201.6
R1
int GE0/0
ip address 209.165.201.2 255.255.255.252
int GE0/1
ip address 209.165.201.6 255.255.255.252
router bgp 65401
bgp log-neighbor-changes
redistribute static
neighbor 209.165.201.1 remote-as 65402
neighbor 209.165.201.5 remote-as 65403
ip route 209.165.200.224 255.255.255.224
ip route 209.165.202.128 255.255.255.224

Refer to the exhibits. A company with autonomous system number AS65401 has obtained IP address block 209.165.200.224/27 from ARIN. The company then was assigned block 209.165.202.128/27 from ISP2. An engineer in ISP1 reports that they are receiving ISP2 routes from AS65401. Which configuration will fix the issue?
A. access-list 10 deny 209.165.202.128 0.0.0.31
access-list 10 permit any
router bgp 65401
neighbor 209.165.201.1 distribute-list 10 out

B. access-list 10 deny 209.165.202.128 0.0.0.31
access-list 10 permit any
router bgp 65401
neighbor 209.165.201.1 distribute-list 10 in

C. ip route 209.165.200.224 255.255.255.224 209.165.201.1
ip route 209.165.202.128 255.255.255.224 209.165.201.5

D. ip route 0.0.0.0 0.0.0.0 209.165.201.1
ip route 0.0.0.0 0.0.0.0 209.165.201.5

Q3
ip sla 10
tcp connect 10.1.1.1 80
ip sla schedule 10 life 30 start time now
Then has a topology with 3 routers in the same ospf area and bgp setup. Off hanging to the bottom left is a 4th router. It has the IPs that are in the question.

Refer to the exhibit. A user has set up an IP SLA probe to test if a non SLA host web server on IP address 10.1.1.1. I do not remember what its checking if it accepts but then ask. Which actoun should the network administrator recommend for the probe to succeed?
A. Modify the ip sla schedule frequency to forever
B. Add icmp-echo command for the host
C. Add the control disable option to the tcp connect
D. Re-issue the ip sla schedule

Q4
DND to configure a policy to avoid following packet forwarding based on the normal routing. (These are the options not the correct answers.) It gives steps 1-6.
Configure route map instances
configure set commands
configure fast switching for PBR
configure ACLs
configure match commands
configure PBR on the interface

Q5
IPv6 question about not being able to SSH. You will have topology with 3 routers and an access list config. Be sure to read up on how to read an access list as I do not remember the IPs lol
A. Modify line 10 of the access list to permit instead of deny
B. Remove line 60 from the access list
C. Modify line 30 of the access list to permit instead of deny
D. Remove line 70 from the access list.