Share your ENARSI Experience

About ipv6 fhs it was a D&D about it’s features: what does those features do and how. so you have to understand the difference between them all. also it was a DHCPv6 guard feature in that question, so you have to know it as well. frankly, it was about 7 ipv6 fhs features there.

regarding ssh\telnet it was a question where it says that telnet or ssh is not working when you try to connect from R1 to another router, and you have a setting which permits telnet but ssh is off on R1 which you are connected to via console and you need to connect to another router from this R1 (not specified via ssh or via telnet). Answers are all ssh-related commands which can be implemented on R1: -transport input ssh, -transport output ssh, -transport preferred ssh, and something else related to ssh.
So here seems to be correct ‘Transport output ssh’ which allows you to perform this type of connection to another device.

there was a D&D question aboute C,CE,PE,P

@mi -mi there was some question i cant remember exactly
one of them was about ssh syns and establishment or something like that
another one was aboute the a BGP,there was two link and the question want to filter inbound and outbound link A and use link B and the answers were aboute changing as-path,weight,local-p….
can u remember these questions?

there was a question aboute tagging a subnet
configuration was 3 ip prefix-list and 3 route-map
the answers were changing route-maps or prefix-lists

@mi – there was a question about snmp trap can u remember it too?

@Xr, yes I remember smt about ssh syn but very vaguely.
about BGP – yes, there were two AS, administrator is logged in to the Router in one AS, this router has 2 links (A and B) to 2 routers from second AS. Administrator needs to exclude incoming and outgoing traffic from the link A in order to maintain the router. There were possible configuration answers like:
change weight, local pref, or AS path. I’ve chosen the one where administrator does some changes on link A (do not remember what exactly) and increase weight on link B.

@Anonymous, remember but very vaguely, sorry

anothet question
why Neighbors Stuck in Exstart/Exchange State in ospf?
I think the answer was something related with MTU

sorry guys networktut doesnt let me post anything
another question
why Neighbors Stuck in Exstart/Exchange State in OSPF?
the answer was something related with MTU

what is the answer here ??

Refer to the exhibit. What is the result if applying this configuration?
R1#show policy-map control-plane
Control Plane
Service-policy input: CoPP-BGP
Class-map: BGP (match-all)
2716 packets, 193843 bytes
5 minute offered rate 0000 bps, drop rate 0000 bps
Match: access-group name BGP
drop
Class-map: class-default (match-any)
5212 packets, 64484847 bytes
5 minute offered rate 0000 bps, drop rate 0000 bps
Match: any
A. The router can form BGP neighborships with any othergr device. B. The router can form BGP neighborships with any device that mawdatched by the access list named ―BGP‖ C. The router cannot form BGP neighborships with any other device D. The router cannot form BGP neighborships with any device that is matched by the access list named ―BGP

Could you please tell me the correct answers based on below questions:

1-) Which component of MPLS VPNs is used to extend the IP address so that an engineer is able to identify to whichsc VPN it belongs?
A. VPNv4 address family
B. RD
C. RT
D. LDP

2-) What is an advantage of using BFD?
A. It detects local link failure at layer 1 and updates routing table.
B. It detects local link failure at layer 2 and updates routing protocols.
C. It has sub-second failure detection for layer 1 and layer 3 problems.
D. It has sub-second failure detection for layer 1 and layer 2 problems.

Hi which one is correct:

Digital tut

SNMPv2c: + community xzstring + no encryption + read-only
SNMPv3: + username and password + authentication + privileged

Chinese

SNMPv2c: + community string + username and password + no encryption
SNMPv3: + authentication + privileged + read-only

Refer to the exhibit. What is the result if applying this configuration?
R1#show policy-map control-plane
Control Plane
Service-policy input: CoPP-BGP
Class-map: BGP (match-all)
2716 packets, 193843 bytes
5 minute offered rate 0000 bps, drop rate 0000 bps
Match: access-group name BGP
drop
Class-map: class-default (match-any)
5212 packets, 64484847 bytes
5 minute offered rate 0000 bps, drop rate 0000 bps
Match: any
A. The router can form BGP neighborships with any other device. B. The router can form BGP neighborships with any device that matched by the joaccess list named ―BGP‖ C. The router cannot form BGP neighborships with any other device D. The router cannot form BGP neighborships with any device that is matched by the access list named ―BGP

@Anonymous the correct answer are:
1-) B. RD
2-) D. It has sub-second failure detection for layer 1 and layer 2 problems

Digital tut

D. The router cannot form BGP neighborships with any device that is matched by the access list named ―BGP

@networktut I appreciate all your help so far, could you confirm us when you will have an update.

Hi guys i am going to give my CCNP ENARSI exam so could you please tell me is there any updates?

@faheem -if u realy ready go to exam because there is lot of new questions

Please My current CCNP R AND S will expire nest year, Which of the exam do I need to recertfiy? Is it ENARSI OR ENCOR. Kindly advise

when networktut will have new questions ?

@xr, what percentage are new questions with regard to questions already here in network tut??

@networktut

I have the new questions, would you like me to send them directly to you?

@johnsnow-there 20 new questions
At least in my exam

@mikeyeah do us the favor and share new qs, where did you get them from?

@Mijeyeah can u share it with us ?

@Mikeyeah:can u pls share the topic for preparation

@mikeyeah
please, also share with us new question you found in the exam

@mikeyeah please share the questions

@mikeyeah, well done on getting the questions. I failed the exam on the 23rd Oct and i know how hard it is to try and remember the new questions word for word. please upload what you can and we will research the answers.

Can someone share the link of the new questions?

@king_mufasa what was your biggest challenge in the exam? what could you have done differently?