Share your ENARSI Experience

hi anyone

please send me email question from @howzit and @Sumdude

b.septian2017 @ gmail (dot) com

Thanks guys

Hey Guys,
Can anyone please share with me the latest QA for ENARSI?
my email is -> iscofate (at) gmail (dot) com

@Sumdude and @howzit and @Failed CCNP 300-410

Kindly send me the h2p and networktut 98q PLEASE, Thank you so much

la _ marck @ y a h o o . com

what is the answer here.
since according to Netguy is( B) but on the new questions
they say it (C).

What is an advantage of using BFD?

A. It detects local link failure at layer 1 and updates routing table
B. It detects local link failure at layer 3 and updates routing protocols
C. It has sub-second failure detection for layer 1 and layer 2 problems.
D. It has sub-second failure detection for layer 1 and layer 3 problems.

@Future. I am still trying to figure that one out too. Seems like it could be more than one answer. According to Cisco, BFD “provides a single, standardized method of link/device/protocol failure detection at any protocol layer and over any media.”

https://www.cisco.com/en/US/technologies/tk648/tk365/tk480/technologies_white_paper0900aecd80244005.html

is there anyone passing using the new questions ?!
update needed please

Hello please if someone pass the exam let us know we need to know how válida are these questions

Hi guys, netguy and networtut,

can someone confirm right answer for these question, because according to h2pass and networktut are different.

Refer to the exhibit. The network administrator configured VRF lite for customer A. The technician at the remote site misconfigured VRF on the router. Which configuration will resolve connectivity for both sites of customer A?

A.
ip vrf customer_a
rd 1:2
route-target both 1:1 – according to networktut is true

B.
ip vrf customer_a
rd 1:2
route-target both 1:2

C.
ip vrf customer_a
rd 1:1
router-target import 1:1
router-target export 1:2 – accordint to H2pass is true

D.
ip vrf customer_a
rd 1:1
route-target export 1:2
router-target import 1:2

After some changes in the routing policy, it is noticed that the router in AS 45123 is being used as a transit AS router for several service providers. Which configuration ensures that the branch router in AS 45123 advertises only the local networks to all SP neighbors?

A.
ip as-path access-list 1 permit ^45123$ – accordint to H2pass is true
!
router bgp 45123
neighbor SP-Neighbors filter-list 1 out

B.
ip as-path access-list 1 permit ^45123
!
router bgp 45123
neighbor SP-Neighbors filter-list 1 out

C.
ip as-path access-list 1 permit ^$ – according to networktut is true
!
router bgp 45123
neighbor SP-Neighbors filter-list 1 out

D.
ip as-path access-list 1 permit
!
router bgp 45123
neighbor SP-Neighbors filter-list 1 out

Refer to the exhibit. A junior engineer updated a branch router configuration. Immediately after the change, the engineer receives calls from the help desk that branch personnel cannot reach any network destinations. Which configuration restores service and continues to block 10.1.1.100/32?

A. ip prefix-list 102 seq 15 permit 0.0.0.0/32 le 32
B. route-map FILTER-IN permit 20 – according to networktut is true
C. ip prefix-list 102 seq 5 permit 0.0.0.0/32 le 32 – accordint to H2pass is true
D. route-map FILTER-IN deny 5

Do you have the H2P dump. Would you mind sharing? I can trade the dumps from here if you need those?

Yes would be nice to know wich answer are correct either network tus or how2pass

@ggg Could you please share H2P dumps to me please
email: ambaraya @ outlook . com

@howzit. or anyone that has gotten from him should send to my mail adesua1931 @ gmail(dot)com.

If anyone wants to trade dumps let me know. I need the H2P and am willing to trade.

@ggg
For the first one – A
Since the route-target for import must match the export one on the other peer, and the export with the peer’s import RT, so in that case, both are 1:1

For the second one – C
Since permit ^$ is to only permit locally generated routes

For the third one – B
Since the entry to block 10.1.1.100/32 is the most specific one, so must go first, then the permit 20 matches and permits everything else

@heyo
Which is the most recent one you have? How many Qs?

@AnthCal I got the one from Aug 7. Do you have H2P?

@anthcal its 98q

@networktut can you confirm that OSPF section Q2 has correct available answers? A different site is showing different available answers (IT Exams). Please advise as this makes a big difference.

@Gabe, i saw that you are from people who are waiting new questions.how you are sure that these answers are correct ?i do not think that on the first question the answer is A. for other two i am not sure too.

I recently received the new Qs, and those were the answers there, and also the ones that make the most sense according to what I studied from the ENARSI Study Guide and some MPLS course videos. I am sure the RTs are the part that absolutely must match.

@heyo
I algo have the one from Aug 7 but only with the new 18 Qs. Besides that I have the one I believe is from july.
Can you send me the 98Qs to gfc153 @ gmail. com ? I would be thankful for that.

i want to know the answer of this question, There is not answer
Question 4

Refer to the exhibit. An administrator noticed that after a change was made on R1, the timestamps on the system logs did not match the clock. What is the reasons for this error?

service timestamps debug datetime msec
service timestamps log datetime
clock timezone MST -7 0
clock summer-time MST recurring
ntp authentication-key 1 md5 00101AOB0152181206224747071E 7
ntp server 10.10.10.10
R1#show clock
*06:13:44.045 MST Sun Dec 30 2018
R1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#logging host 10.10.10.20
R1(config)#end
R1#
*Dec 30 13:15:26: %SYS-S-CONFIG_I: Configured from console by console
R1#
*Dec 30 13:1S:28: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 10.10.10.20 port 514 started – CLI initiated

A.The NTP server is in an different time zone
B.The system clock is set incorrectly to summer-time hours
C.The keyword localtime is defined on the timestamp service command
D.An authentication error with the NTP server results in an incorrect timestamp

C ?

@RRR
I also believe it is C. However, where I’ve seen it it says “The Keyword localtime is NOT defined…”

Has anyone appeared in exam recently ?
Are networktut’s 18 new questions enough to pass exam?
Thanks

Hello gais, Is there a exam today? is the dump valid?

@abc are not enough

@anthcal do you have the H2P?

RRR did you appear in exam or someone who you know?
Because I think 20 new questions are in exam and we have 18 right now.
Can someone share H2P questions here?

there are more questions. i am waiting tut to update

I guess it is better to wait until tut updates new questions