Share your ENARSI Experience
The new ENARSI 300-410 has come to replace the old CCNP exams so we create the “Share your ENARSI Experience” for everyone to share their experience to prepare for this new exam.
Please share with us your experience to prepare for the new ENARSI 300-410 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: To get the new CCNP Enterprise certificate, you need to pass the ENCOR 350-401 exam (core exam) and one of the concentration exam.
Your posts are warmly welcome! Hope you will find useful information here!
@Networktut
Will you open ENARSI web site?
Is this the same as new 350-401 ENCOR?
Hello, I could have gotten my CCNP but I was careless with choosing the answers. But networktut was helpful, got 835 score. Look forward for the new site and redeem myself.
Q1: B. ipv6 traffic-filter INTERNET {in|out}
Q2: A. sh ip interface
D. sh ip traffic
Q3: A. Normal network traffic experiences asymmetric routing
Q4: E. 60 permit tcp host 2002:ABC:2000:2:2::2 host 2000:ABC:20:2:2::2 eq 22
Q5: A. set the exec-timeout 0 0 command on line con 0
Q6: A. EXSTART
Q7: D. DSW-01(config)#interface gig1/2
DSW-01(config-if)#spanning-tree cost 5
Q8: A. There ase different VTP domain for S1 and S2
Q9: A. Recursive routing
: B. ipv6 traffic-filter INTERNET {in|out}
Q2: A. sh ip interface
D. sh ip traffic
Q3: A. Normal network traffic experiences asymmetric routing
Q4: E. 60 permit tcp host 2002:ABC:2000:2:2::2 host 2000:ABC:20:2:2::2 eq 22
Q5: A. set the exec-timeout 0 0 command on line con 0
Q6: A. EXSTART
Q7: D. DSW-01(config)#interface gig1/2
DSW-01(codnfig-if)#spanning-tree cost 5
Q8: A. There ase different VTP domain for S1 and S2
Q9: A. Recursive routing
Pass today with more than 920 points. Dumps are 100% valid.
NOV13 MCQ
BGP and HSRP Simlets
Tickets are 100% valid.
I read the CCNP T-shoot Cisco Certification Guide Book and the CCNP Tshoot livelessons videos. But if you just check this dumps, You could happen anyway.
passed with 928 dumps,MCQs, simlets etc still valid got 100% except on the Layer 2 stuff got a 78% there wish they would tell you what you missed for learning purposes. Onto the ENCOR now after the 24th. Hopefully another study website for that exists similar to this one.
Passed route, switch and tshoot with flying colors. Almost aced it in tshoot. One new MCQ question although similar to Nov MCQ(hint: just make sure to know the difference between spanning tree port priority and spanning tree cost).
Everything else are the same regarding SIMs and Tickets. Well that’s it for now, Hope everyone gets what they want.
BTW. I hope those who haven’t booked the exam yet, better do it now. Do not procrastinate because most Pearson Vue testing centers are fully booked.
Good luck to all!!!!!
:)
Hello everyone
my question
is 300-410 same like the old 300-135 tshoot exam ?
i failed last week and are only able to retake the exam after 23 of Feb. what means it should me the new exam.
i need to recert the ccnp is the 300-410 enough ? or must it be the core
Implementing and Operating Cisco Enterprise Network Core 300-401
thank you
i just failed TSHOOT.
@theanswer if you already passed Route & Switch, you will have to take one of the exams below.
300-410 ENARSI
300-415 ENSDWI
300-420 ENSLD
300-425 ENWLSD
300-430 ENWLSI
300-435 ENAUTO
@Dotcom
info from site
Professional Recertification 3 years •Pass one technology core exam
•Pass any two professional concentration exams
and this is what makes me confused. so is that sure that when i will take next week the 300-410 Enarsi Exam my CCNP is recertificate ??
@Anonymous
Here is the link to answer your question, am really not sure what will happen. i will wait on anyone that will be taking the exam soon.
https://www.cisco.com/c/en/us/training-events/training-certifications/certifications/professional/ccnp-routing-switching-migration-tool.html
I failed the TSHOOT exam today. I followed NULLZERO strategy and SAM too but i couldnt ping 10.1.1.1, 10.1.1.2 or 10.2.1.1 and there were issues on DWS1 (VLAN/port ACL) or AWS1 access VLANs ..got stuck here for 30 minutes..i could only see issues on R1 OSPF …because of this I run out of time …I had to rush towards the end.
I cant wait for 300-410 material now…i hope you get them very soon. Goodluck to others who are taking the exams this weekend
Sorry meant to say there were no issues…
I just finished the exam 300-135 with 1000 points. Thank you for this website.
TIPS:
Purchase premium membership
Study everything provided by this site
Practice and analyze
Rest
Practice
and most important PRAY
Pass the exam ..tip
Practice practice. Because on the test time will be your enemy.. causing you to get confused about the sims.
Look and recheck the exams sims Ip addresses..
Get latest and real 300-410 exam questions answers on 20% discount with 100% passing guarantee. For more info visit our site.
Is anyone taking this exam soon? please give us feed back on what to expect in the exam.
If someone did the new test 300-410. please shared with us here.
Hi Guys,
I failed the exam on the 21st.
Although I answered all the questions, I got 0% on the infrastructure services sections. On all the other sections I scored more than 76%
The problem is that I cannot retake the exam…
I think this is not fair at all.
Any ideas/advice?
Many Thanks.
Next time, don’t wait until the last minute, when you have less than five days left on an exam, so you know there is no time for a retake. Now you just move on and start studying for the new exams. What they did is totally fair, and you just planned poorly.
I agree with last poster, it’s totally fair as we’ve known for quite a long time when these tests were going to expire and the new ones would be rolling out
I’m in a fight with Cisco now. I passed TSHOOT before I passed CCNA (my CCNP expired so had to do it all over again). So here’s how I took the tests…blasted thru TSHOOT on 8 Jan 2016, then realized I would have to pass CCNA again if Cisco was going to recognize me as CCNP R&S certified. so on 29 July 2016 I passed CCNA, then passed ROUTE on 16 Aug 2018 (barely 2 years after TSHOOT), then on 21 Feb 2020 passed SWITCH. Now today Cisco is saying I’m not CCNP Enterprise certified because their “automated system” says I “started” my CCNP on 16 Aug 2018 (the date I passed ROUTE) because I hadn’t passed my CCNA before taking TSHOOT. What a crock of shit
Cisco one of the greatest NON customer focused companies in the world. They were a great company before the accountants started running the company.
Did it not convert to CCNP with the new system?
@Anam
The order does not matter. I used to know/work with people who did the same as you.
I think the issue here is the time from passing TSHHOT (your first exam) and SWITCH (your last) is greater than 3 years. The requirement used to be that you had 36 months from passing the first exam to complete all remaining ones.
In your case, 8 Jan 2016 – 21 Feb 2020, is too long. So, you will have to take one elective exam to get your CCNP. See the Cisco Migration Tool for options.
Good catch!
Hi, Is there anyone have the ENARSI official cert guide PDF format? Please share give the download link. Thank you.
@Umbrell. The book is not yet released. You can read it online if you subscribe to https://learning.oreilly.com. You have ten days of free trial access.
Please also add devops 200-901 :)