Share your ENARSI Experience

Guys Just passed my ENARSI exam with a score of 8XX . Most of the questions from networktut premium. One new question from BGP. Good Luck Guys!! Thanks Networktut Premium for great resources!

hello @cnnp-enterprise congrats!! do you rember one nwe question rom BGP?? thank you so much

@fleshgod it had something about why BGP state remains idle. I can’t remember the options. Good luck !!

Hi all! just passed with 8XX. premium is enough to pass!

Hi @amadeus

How many questions do you have more in premium networktup dumps that in dump in this link?

http://www.networktut.com/questions-and-answers

Passed the exam, got 960. I just used the May file – http://www.networktut.com/questions-and-answers
But I changed some of the answer during my test. Here are some:

——

Which command allows traffic to load-balance in an MPLS Layer 3 VPN configuration?
A. multi-paths eibgp 2
B. maximum-paths 2
C. maximum-paths ibgp 2 XXX
D. multi-paths 2

Refer to the exhibit. After applying IPsec, the engineer observed that the DMVPN tunnel went down, and both spoke-to-spoke and hub were not establishing.
Which two actions resolve the issue? (Choose two.)

A. Change the mode from mode tunnel to mode transport on R3. XXX
B. Remove the crypto isakmp key cisco address 10.1.1.1 on R2 and R3.
C. Configure the crypto isakmp key cisco address 192.1.1.1 on R2 and R3.
D. Configure the crypto isakmp key cisco address 0.0.0.0 on R2 and R3. XXX
E. Change the mode from mode transport to mode tunnel on R2.

Refer to the exhibit. Network operations cannot read or write an configuration on the device with this configuration from the operation subnet. Which two configuration fix the issue

A. Configure SNMP rw permission in addition to community ciscotest XXX
B. Modify access list 1 and allow operations subnet in the access list XXX
C. Modify SNMP rw permission in addition to version 1
D. Configure SNMP rw permission in addition to version 1
E. Configure SNMP rw permission in addition to community ciscotest 1

Refer to the exhibit. An administrator noticed that after a change was made on R1, the timestamps on the system logs did not match the clock. What is the reasons for this error?
A. The keyword localtime is not defined on the timestamp service command XXX
B. The NTP server is in an different time zone
C. An authentication error with the NTP server results in an incorrect timestamp
D. The system clock is set incorrectly to summer-time hours

Refer to the exhibit. A router receiving BGP routing updates from multiple neighbors for routers in AS 690. What is the reason that the router still sends traffic that is destined to AS 690 to a neighbor other than 10.222.10.1?

A. The local preference value in another neighbor statement is higher than 250
B. The local preference value should be set to the same value as the weight in the route map
C. The route map is applied in the wrong direction
D. The weight value in another statement is higher than 200 XXX

RouteMap question: Question No. 8.
Refer to the exhibit The output of the trace from R5 shows a loop in the network.
Answer is C, = the choices with – R3 in router ospf 1 , and R4 is in router eigrp 1.

@Nick

Can you share your dump? please

because I don’t find this question at the PDF of networktut/Q&A

Refer to the exhibit. After applying IPsec, the engineer observed that the DMVPN tunnel went down, and both spoke-to-spoke and hub were not establishing.
Which two actions resolve the issue? (Choose two.)

A. Change the mode from mode tunnel to mode transport on R3. XXX
B. Remove the crypto isakmp key cisco address 10.1.1.1 on R2 and R3.
C. Configure the crypto isakmp key cisco address 192.1.1.1 on R2 and R3.
D. Configure the crypto isakmp key cisco address 0.0.0.0 on R2 and R3. XXX
E. Change the mode from mode transport to mode tunnel on R2.

@Nick, sorry I remember now. tanks

passed, 60 qsn, no new qsns

tomorrow take esame , thank you so much , Does anyone know the answer???

Refer to the exhibit. An administrator that is connected to the console does not see debug messages when remote users log in. Which action ensures that debug messages are displayed for remote loggings?

R1(config)#do show running-config | section line|username username cisco secret 5 $l$^e/o$I3G5cXODxpYMSJ70PzEyoO line con 0
logging synchronous
line vty 0 4
login local
transport input telnet
R1(config)# logging console 7
R1(config)# do debug authentication
R1(config)#

A. Enter the transport input ssh configuration command
B. Enter the terminal monitor exec command
C. Enter the logging console debugging configuration command
D. Enter the aaa new-model configuration command

Answer: C (?)

Which two statements about redistributing EIGRP into OSPF are true? (Choose two.)
A. The redistributed EIGRP routes appear as OSPF external type 2 routes in the routing table.
B. The redistributed EIGRP routes are placed into an OSPF area whose area ID matches the EIGRP autonomous system number.
C. The redistributed EIGRP routes appear as type 5 LSAs in the OSPF database.
D. The administrative distance of the redistributed routes is 170.
E. The redistributed EIGRP routes appear as OSPF external type 1.
F. The redistributed EIGRP routes as type 3 LSAs in the OSPF database.

A C right???

Passed 9xx. All dumps in networktut still valid. One new question i ny test.

I passed the exam as well. Questions are from here however some of them are changed. For example:

question 1 (OSPF/EIGRP):
Which configuration adds an IPv4 interface to an OSPFv3 process in OSPFv3 address family configuration?
A. Router# ospf3 1 address-family ipv4
B. Router(config-router)#ospfv3 1 ipv4 area 0
C. Router(config-router)#ospfv3 3 1
D. Router# ospfv3 1 address-family ipv4 unicast

This is new: R1(config-if)#ospfv3 1 ipv4 area 0 (and correct since it’s under interface level)

Route Map question 3
Refer to the exhibit. Which configuration configures a policy on R1 to forward any traffic that is sourced from the 192.168.130.0/24 network to 172.20.20.0/30 network?
on the exam, they are asking for the path to the other router: 172.20.40.0/30 (R2) so make sure you understand the concept and what should be the next hop. 172.20.40.1/30 in this case

@Nick please,you can to show the answer of the questions that you change in exam?

passing!! thank you network tut!!

still question are most valid !! study only question networktut!!

@fleshgod

CONGRATULATIONS GUY!!!!!!!

@fleshgod, are you studied, all questions on networktut or http://www.networktut.com/questions-and-answers only?

anybody can explain ENARSI has simulation questions or MCQ only

yes studied all question on http://www.networktut.com/questions-and-answers only

good luck

@AAA, the answers are the one with “XXX” in the choices.

HELLO ADMIN I DONT SEE HERE any updates for a while like i saw in the other encor site ,are those questions still up to date?

As of July 20, how many Qs are there in valid dumps??

Are the questions in May 31st PDF file still valid? Please, could someone let me know if there are changes please. Thank you guys

Hi guys, Jut wanted to let you know I took the Enarsi 300-410 on Friday and failed. It was NOT this site’s fault but my own as I didn’t know there were no troubleshoot tickets on the Enarsi until the morning of the exam. I asked on this site the night before and it was made clear to me that there were no Tshoot tickets. However I was studying exam questions for another site in which 80% of the questions weren’t on the exam yet I still managed to get a 706. so I rescheduled for this Friday and please believe I will be prepared! Thankyou@networktut. I’ll let you guys know Friday evening when I pass!

Hello DAZ,

Are the questions you came across similar to what you are seeing here at networktut?

just took the exam. dump is not valid.

Does membership include the quizzes like on Encor site?

dump is valid? i have exam

Anyone appeared for exam recently, can you confirm how many new questions are in exam.
I have exam next week

I took the Enarsi 300-410 yesterday and failed. Dump is not valid.