Share your ENARSI Experience

Hi, do you know the answer is right? thank you so much

A router receiving BGP routing updates from multiple neighbors for routers in AS 690. What is the reason that the router still sends traffic that is destined to AS 690 to a neighbor other than 10.222.10.1?

A. The local preference value in another neighbor statement is higher than 250
B. The local preference value should be set to the same value as the weight in the route map
C. The route map is applied in the wrong direction ************************+
D. The weight value in another statement is higher than 200

This is right C ???

Hi All, passed today with score 8xx the premium is valid all questions from premium, just one new related to BGP (why the BGP idle because the prefix exceeds the limit or something like that.Thanks, networktut

Is there a difference on the contents/questions here for the premium account and non premium account?

hello
How many questions does the ccnp enarsi exam take?
How much does the exam cost?
how much is the passing score?

How many questions come in exam?

60 questions
Cost 300$, there is discount 50% if you book before 26/06 and do the exam before 16/07
passing score 825

CCNP ENARSI PASSED, big thanks to Networktut, all the questons are still valid.

Good luck!!!

exam booked for July 16 with voucher. Do you think 20 days are fine to prepare for the exam? thank you so much

@RON BERSERKER

Congrats first of all!!!!

That you know, new questions added?

thank you so much

@fleshgods
depends how many hours you put in a day.but that should be more than enough heck even sooner if you feel good ….good luck!

Is that enough to pass? Any new questions?

Did it add to exam new questions from FEB 24?

Networktut still valid. Study dump that found

Hey Flashdog, did you pass?

Did somebody take the test recently? Is there something new?

Thanks.

I will take exam on JULY 10th. Is that enough for pass?

R1#show policy-map control-plane
Control Plane
Service-policy input: CoPP-BGP

Class-map: BGP (match-all)
2716 packets, 193843 bytes
5 minute offered rate 0000 bps, drop rate 0000 bps Match: access-group name BGP
drop

Class-map: class-default (match-any)
5212 packets, 64484847 bytes
5 minute offered rate 0000 bps, drop rate 0000 bps Match: any

A:The router can form BGP neighborships with any other device.???
B:The router cannot form BGP neighborships with any device that is matched by the access list named BGP ??

where can i get may 2020 dump, anyone share the link

http://www.networktut.com/questions-and-answers

probably tomorrow we will have update

How many questions are in Premium account?

@Enarsi
80 questions(with drag and drop)

tomorrow i will take ccnp 300-410

you advise me to spend with the dump of May or I wait? Thank you for your answers???

if anyone has the new dump, please send me an email to {email not allowed}
Thank you very much.

be carreful malicious link

passed today, confirm networktut. Just a few new questions, but nothing too complicated if you know your topics.

you don’t remember any new question please?

Please Check IF the answer are Correct.

Which method changes the forwarding decision that a router makes first changing the routing table or influencing the IP data plane?
A. Policy-based routing
B. Nonbroadcast multi-access
C. Packet switching
D. Forwarding information base
Answer: A

Refer to the exhibit. Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet.
Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?
A. Issue the eigrp stub command on R1
B. Issue the no neighbor stub command on R1
C. Issue the eigrp stub command on R2
D. Issue the no eigrp stub command on R2
Answer: D

Refer to the exhibit. An engineer is troubleshooting BGP on a device but discovers that the clock on the device does not correspond to the time stamp of the log entries.
Which action ensures consistency between the two times?
A. Configure the service timestamps log uptime command in global configuration mode.
B. Configure the logging clock synchronize command in global configuration mode.
C. Configure the service timestamps log datetime localtime command in global configuration mode.
D. Make sure that the clock on the device is synchronized with an NTP server.
Answer: C

Which configuration adds an IPv4 interface to an OSPFv3 process in OSPFv3 address family configuration?
A. router ospfv3 1 address-family ipv4
B. Router(config-router)#ospfv3 1 ipv4 area 0
C. Router(config-if)#ospfv3 1 ipv4 area 0
D. router ospfv3 1 address-family ipv4 unicast
Answer: D

Refer to the exhibit. A router is receiving BGP routing updates from multiple neighbors for routes in AS 690.
What is the reason that the router still sends traffic that is destined to AS 690 to a neighbor other than 10.222.1.1?
A. The local preference value in another neighbor statement is higher than 250.
B. The local preference value should be set to the same value as the weight in the route map.
C. The route map is applied in the wrong direction.
D. The weight value in another neighbor statement is higher than 200.
Answer: D

Which command allows traffic to load-balance in an MPLS Layer 3 VPN configuration?
A. Multi-paths eibgp 2
B. Maximum-paths ibgp 2
C. Multi-paths 2
D. Maximum-paths 2
Answer: B

An engineer is trying to copy an IOS file from one router to another router by using TFTP. Which two actions are needed to allow the file to copy? (Choose two)
A. Configure the TFTP authentication on the source router with the ―tftp-server authentication local‖ command.
B. Configure a user on the source router with the username tftp password tftp command.
C. Enable the TFTP server on the source router with the tftp-server flash: command.
D. TFTP is not supported in recent IOS versions, so an alternative method must be used.
E. Copy the file to the destination router with the copy tftp: flash: command
Answer: C,E

Refer to the exhibit. An administrator noticed that after a change was made on R1, the timestamps on the system logs did not match the clock. What is the reasons for this error?
A. The keyword localtime is not defined on the timestamp service command
B. The NTP server is in an different time zone
C. An authentication error with the NTP server results in an incorrect timestamp
D. The system clock is set incorrectly to summer-time hours
Answer: A

When provisioning a device in Cisco DNA Center, the engineer sees the error message “Cannot select the device. Not compatible with template”.
What is the reason for the error?
A. The template has an incorrect configuration.
B. The software version of the template is different from the software version of the device.
C. The changes to the template were not committed.
D. The tag that was used to filter the templates does not match the device tag.
Answer: D

@ Please Check IF Correct.
Which configuration adds an IPv4 interface to an OSPFv3 process in OSPFv3 address family configuration?
A. router ospfv3 1 address-family ipv4
B. Router(config-router)#ospfv3 1 ipv4 area 0
C. Router(config-if)#ospfv3 1 ipv4 area 0
D. router ospfv3 1 address-family ipv4 unicast
Answer: C

be carefull it’s a scam ” REPLACE WWW BY . to AND GET DUMPS””

please anyone,may share the latest dump?

@enarsi-dump probably tomorrow in this link

http://www.networktut.com/questions-and-answers