Share your ENARSI Experience

congrats! what were the D&D?
on OSPF was the wrong IP on interface connecting R4 and R5?

Passed the Exam today

McQ – I think 3 – 5 new questions and the rest is available here
Simulation (CoPP / DMVPN / BGP)
D&D – only saw 2 which was for MPLS VPN (with the RD / RT / RRP / multiprotocol BGP) and the MPLS Term (P / PE / CE / LSP)

Thanks Networktut!

@Dycroft
GJ!!!
Can you still recall on BGP sim about advertising w/o using aggregate command? did you just use a black hole or a static route next hop null 0 for that 10.10.X.X/16?

@NSD_Spirit

I used static route next hop null 0 for 10.20.X.X/16 for both R4 and R5

I was not able to complete all the task on the BGP sim as I ran out of time and still had around 10 McQ after that 3rd sim

@NSD. Look at the configuration someone left in the bgp sim comments. That’s exactly what you need.

Hi All
Passed the exam today

3-4 DnDs from here, few new MCQs, Networktut, please try to get those new questions here

Sims – VRF, OSPF 2 & DMVPN

Please note that the R4 interface (e0/1) on OSPF 2 sim is always wrong, so do check it properly
Escape sequence (Ctrl+Shit+6) doesn’t work for DMVPN sim, so save the config before try that

Good luck

Thanks Networktut

Unfortunately, I didnt pass, 3 sim I did just 1, about 6 new Qs. I ll try after 2 week.

By the way, I think the sim is considered.

@Anonymous

which sim did you get?

Hi guys, have you heard anything about Cisco changing their R&S exam in September? I read on another forum that they are going to redo labs and questions.

Actually I had 4not 3
DMVPN1
OSPF1&2
BGP

I did just DMVPN and my result score ~70

@Ab

in OSPF2 sim, did you have to configure proper key chain?

@Daska

No, the key chain is there, it’s just to correct the wrong key-string in it according the task.

Also, correction to my initial comments re ;R4 interface (e0/1) on OSPF 2 sim is always wrong’, its actually not always wrong, so do check it before hand on R5 e0/1 address before making that change in exam

hey guys just passed the exam! Thank you networktut

SIMS: OSPF2, CoPP, VRF
DND: 3-4 All is here
MCQ: 4-5 new questions

@shark

do you remember D&D questions?

Failed last week but bounced back today. Passed the exam!!!
VRF
OSPF 2
CoPP

Much appreciated Networktut and everyone.

Hi guys,

I passed the exam last Tuesday. There were 55 questions and 3 labs, about COPP, VRF AND OSPF, the same here as Tut. I noticed 3 new questions, but the majority being from NEW QUESTIONS 2-6.

Thanks a lot networktut, I finally got my CCNP. Success to all.

@Enarsi2023

congrats! did you remove and then reapply control plane in CoPP lab?
Also how did you apply link authentication for OSPF?

i took my exam today and pass. thank you networktut. also, new lab has been introduced in the exam ( BGP with OSPF redistribution )

Did you complete the new lab? and what other labs you have?
what did it look like?

Greetings. Just passed today! Thanks Networktut team. I got 56 questions. Waste too much time on 1st lab of DMVPN. I got more 2 labs (CoPP and BGP). 3 D&D and others were MCQ. Buy the premium account and you will be ok. I believe on next sep-20, Cisco will update the exam, so pay attention on it. Cheers.

Hi everyone !

Yesterday I pass the exam. I saw 5 new questions only one D&D and 3 sims OSPF 2, VRF and CoPP all same as here. the first examination report I sas the status PENDING but today at the morning I received an email with the final status, PASS.

Thanks a lot for this site, is very helpfully with the exam.

Question for all, is the sim required to pass!?

Question for all, is the sim required to pass!?

I passed yesterday. My results said Pending after exam the next morning i checked my account and it said PASS. I took test in June and failed.
56 Qs, 3 sim(CoPP, BGP, DMVPN), 2 or 3 D&D. (MPLS VPN concepts, MPLS terms, and ipv6 first hop security features). just act like sims count because i think they do. get some points on ALL sims even if its not full points.
Thank you to networktut team. Getting the premium access is worth it. Also study questions under categories under “ENARSI 300-410” (BGP, Redistribution, Route-map, etc questions). i noticed several questions from there were on my exam. Also recheck some questions here. i think some are not correct.
Look in the BGP sim comments for Anonymous comment. That is what you need for configs if you get BGP sim. New question on restoring eBGP peering not on here. I think it was simple. Be careful not to get confused with tcp/udp in access list and router-id in question. Another new question about redistribution and bgp route dampening…

I passed yesterday.
56 Qs, 3 sim(CoPP, BGP, DMVPN), 2 or 3 D&D. (MPLS VPN concepts, MPLS terms, and ipv6 first hop security features). 5 new questiones

Thank you Networktut :)

Does anyone took exam and pending results? Does it mean failed?

Took test today, result say passed. But also says to allow 10 days 4 Cisco to rcve exam results. This normal?
Had 2/3 new questions. DMVPN / CoPP / BGP Sims. Solutions were not quite 100 percent accurate.
1 DnD.

Can I read only Part 6 questions and pass the exam.

Studying only part 6 is a sure way to fail miserably. Don’t be lazy, study all 6 parts including the sections listed on the right side of this web page.