Share your ENARSI Experience

difficult exam, passed. the dumps are valid and helped. less than 10 new questions. the labs were exact. i only concluded one (vrf), did half of dmvpn, did not have enough tome for ospf sim 2.

Passed Today

My advise is don’t spend too much time on the labs. I don’t think they count for much of your score. I had dmvpn and ospf labs early and had only 30 min left and still 40 questions. I had vrf lab for my last question but ran out of time. I thought I would fail but ended up passing some how.

LABS: DMVPN OSPF VRF

@Crono

Did you have OSPF sim2 lab?
and how many new multiple choice questions?

Yes @Crono

What % of the dump was on the exam? I am taking my exam this Friday.

@networktut
Can you please update new questions?members mention 10-15 new questions in the exam and last update on New ENARSI Questions – Part 6 was on 9 Mar 2023.
Thank you in advance

Hi, what the valid dumps ? any have please support to share at waqas dot uetpeshawar at gamil dot com. thanks in advance.

Passed! Listed below is a quick breakdown of my exam:

– I agree with SonicRS, there are 5-10 new questions. I don’t remember the questions, but they weren’t hard.
– Most of the d&d were on the exam. Study and know them.
– I had 3 sims (VRP, DMVPN and, CoPP). I completed the VRP and DMVPN and skipped the COPP. I spend too much time on the DMVPN sim.
– Pay attention the DMVPN exam, they almost caught me misconfigured interface on the R2.
– Most of the questions came from the dumps. Make sure you go through and complete 1-6.
– I completed the exam with 30mins to spare.

@need2pass

Do you remember the d&d that was on exam and how many?

If you wait too long maybe Cisco will add many new question and new labs

@ASN

Yes, listed below are the d&d I had on the exam.

– MPLS VPN concepts
-DHCP messages
-SNMP attributes
-MPLS terms

I’ve got the ‘old’ pdf of questions, with no ‘section 6’. Is there a new location for the question list? Old one is dated Feb. 2020…

@gw52 Become a Premium Member. You’ll have access to all sections

Hi finally i passed the exam thanks Networktut

below is my experience & exam

LABS :-

all 3 labs populated around 50-55 questions.. LOL ..first 50 questions are only MCQ & DND

1)BGP—>LAB has Pissed me off & make me crazy..

i belived its DRAFT one but since network tut dont have diagram not able to tell exact

there are total 6 routers Okay
SP–>x2 Edge and 1xBehind (R3-R4) & R2
Customer–> 2xCE and 1xbehind (R4-R5) & R6

The task they gave is
1)on R2 SP Router i belive 3 network its not advertising to Customer (R6) router you have to resolved why its not [possible some blocking -route-map/prefix list] applied also you need to create summary without aggregate command for those routes
2)you have to configured local preference and add router no to local preference value make sure traffic exisiting only from R4 (if you decide local prefernce 100 then add 4 =104 , BECAUSE 4 is R4 no)
3)advertise R6 routes towards service provider

its very confusing , sorry if you not able to understand even i dont solve this 100%

2)DMVPN Configuration Sim–>100% Same as Network TUT –IPSEC Profile name is “ccnp”
3)COPP —>100% Same as Network tut
[eigrp neighbourship flapping will not stop untill you remove and apply CoPP again]

save all configs using copy run start before moving next question

DND–>2 questions
MPLS VPN Concepts –>100% sure
SNMP Atribute/MPLS Terms –>not remember but either 1 of them there not sure exactly which

MCQ –> total 5-6 new questions rest all Network TUT . espec

good luck

@networktut

Please update the new questions they reference, it’s important to have them as a premium member.

i passed the exam on 16th July

thanks Networktut.

Got DMVPN, COpp, BGP SIM . I didnt BGP lab.

passed the exam “56Q” on 22 July thanks Networktut.

4-5 new questions

DMVPN sim –>100% Same as Network TUT –IPSEC Profile name is “ccnp”
CoPP sim –>100% Same as Network TUT
BGP sim i skipped it

for the BGP sim with its diagram and some new questions too
ht(mmm)tps://ww(mmm)w.me(mmm)diafire.com/fi(mmm)le/dzix(mmm)mgytqelol2f/CC(mmm)NP_300_4(mmm)10_EN(mmm)ARSI_May_20(mmm)23.r(mmm)ar/fil(mmm)e

depart (mmm) fr0m liink

@Avo

Thank you very much

Were the new questions in the questions that you provided in the lnk?

I passed the exam recently. All questions are still valid. There were a few new questions that were not a part of the dumps. 3 sims (CoPP, VRF, OSPF2).

Thanks to networktut for helping me get ready for the test!

the answer for this Question “Were the new questions in the questions that you provided in the lnk?” is
No i mean that i studied all the Questions from networktut + the questions that exist in the link
but still there 4-5 new questions

Took the exam today but did not pass..
I am making this post to see if anyone else may have had the same experience i have had.
I had 3 total labs. On two of them i had the issue wherein at least two of the devices were requiring a password to go to Privileged Exec mode.
That password was not given in the notes.
I spent several minutes trying to find it without success and then had to hit NEXT to go to the next question.
If those exams are scored that would certainly have caused me to fail.
In the other parts of the test, the questions from this site were almost all exactly like they were documented here.
This site is the best site i have found for ENARSI so far.

@KMNRuser
about this issue “I had 3 total labs. On two of them i had the issue wherein at least two of the devices were requiring a password to go to Privileged Exec mode.”
it happened with me only when tried to enter by mistake on a Device “not allowed for us to do configuration on it”.

Did anyone else experience the same problem as KMNRuser? This seems most unusual.

@KMNRuser

Were the labs with priv exec mode password one of the labs on this site? Was it a BGP, OSPF, CoPP etc lab on here?

Dude. Thanks Avo. You str8 uhp rawk. The missing topos for these new labs are ihn that uhplowd.

Had the exam today. Passed pretty comfortably.
56 Questions, about 6-7 new, but they were pretty simple, as they were all about routing/pbr configurations/troubleshooting.

Had 3 labs
CoPP & DMVPN were the same as here, even with the IP addresses and names.
If you have an EVE-NG available, try to build them from scratch & then just practise what’s needed, so you get a good understanding on the techs, as it helps with the questions in general.

My last lab was BGP, but I don’t think it is what is available here. I didn’t complete it fully, as it was very vague & very badly explained as to what the end-goal is. There was a route-map used for redistribution in the wrong direction (what we had here), but also a route-map that was pretty much blocking ALL routes, so you had to modify it & add a permit statement, otherwise you have no connectivity.

You had to configure the edge router (connecting to ISP BGP network) to advertise to the internal router as next-hop-self, as otherwise the internal router doesn’t have a route leading outside the network.

Pretty much did 1 of the 4 tasks there & skipped it, as I was confident in my other 2, not sure if it even counts.

Basically, study ALL the questions (not only the “new ones”), as they are all valid & on the exam. If you consistently pass the big compozite quiz & understand the topics (some answers here are wrong), you’re good to go & you’ve got nothing to worry about

passed the exam today nearly certain i failed as ran into serious time trouble, I spent too long on the VRF sim had to bomb through the remaining questions to get the exam complete.
there was at least ten questions i had not seen ( i don’t remember them) i just made educated guesses it must of worked
LABS CoPP VRF and OSPF sim 2
Got most of the Labs correct
There was no bgp lab on the test at all
Best of luck anyone that has to do the exam

HOW MANY QUESTIONS DOES THE DUMP HAVE?

Guys for SIMS , Does the copy and paste works on exam ?

copy and paste does not work
The up arrow function, short cut tabs key and ? key function works.
I found that using the up arrow, editing the end of the the last command I could do but I could not get the cursor to go back to edit the start of a long command, I had to retype the whole command.