Multiple Choice Questions
May 8th, 2018
Go to comments
Question 1
Question 2
Question 3
Explanation
All of these can be modified: protocol, IP destination address, repeat count, Datagram size, Timeout, source address/interface, type of service, DF bit, Validate reply data, Data pattern, Loose, Strict, Record, Timestamp, Verbose, Sweep range of sizes.
Question 4
Question 5
Question 6
I didnot pass my ccnp today. so sad.
any help please send to
8 8 d u b i @ g m a i l . c o m
Hi all!
A lot of people here wrote that all the questions are from November dump,
Are the questions on the site the same as the November dump?
Where can I get the November dump?
Pls help!!!!
hi
i took the test on the 28th jan, all the question and ticket are valid , unfortunately i did not pass
i got 772 /1000, i did not knew this site , i discover it to day .
i got in the exam :
1) Follwing the buttom-up TShoot methods, please order from step 1 to step 4 how to solve an issue with an IP phone:
1. Check PoE
2. Check VLAN
3. Change DHCP GW with option 150
4. Check image file from TFTP server
2) GRE tunnel missing configuration between R1 and R2 R1 source 10.1.1.1 destination 10.1.2.1
R2 source 10.1.2.1 destination 10.1.1.1
@@@MCQs :
Q1: B. ipv6 traffic-filter Internet (in/out)
Q2: A. sh ip interface (choice two)
D. sh ip traffic
Q3: A. Asymmetric
Q4: E. 60 (permit tcp host 2002:2000:2:2:2::2 host 2000:ABC:20:2:2::2 eq 22)
Q5: A. Apply exec-timeout 0 0 in line console 0
Q6: A. EXSTART (ospf question)
Q7: B. spanning-tree cost 5 on interface Gi0/2
Q8: B. Different VTP domains (sw1: cisco123 and sw2:cisco456)
Q9: A. Recursive routing
HSRP & BGP SIMs (2)
ticket :DHCP wrong helper, interface trunk on fa0/1 inasw1, DHCPv6 on R2, Tun 34 on R3, IP NAt inside on Se 0/0/0/ in R1,missing vlan on Channell 13-23 ASW1, vlan filter DSW1,Redistribution Route-map on DW1.
It is a shame that i did not know this site before.
ii had also a ticket where Client A was on APIPA, in AWS1 the port FA 0/1(link to Client 1) WAS administratively down , when i clic on the ASW1 on the response 1 for the ticket , i didn’t had the right answer to chose , the port secury was not configured in the port FA 0/1, there was not err disable.
my question is , can the port fa0/1(link to Client 1) in ASW1, be in Administratively down on a ticket?
Hello @AZER2017! Congrats!
What was a ticket with problem DHCPv6 on R2?
Passed today. Everything on networktut is still valid :) (MCQ from November)
Had both simlets and 10 Tickets (2 with ipv6).
Passed the exam today with 1000. November MCQ questions are still valid and all tickets as well.
Passed also the exam today with 1000. MCQ from November still valid. Thanks networktut!
Passed today with 1000!
All MCQs are good, sims and labs are good but some IPs change so be careful!
@Anon
congrats
WHAT was the changing in the IPs?
please help
Tnx guys for the explanation on DTP question
Im currently in the exam centre. Will let you kno guys
Goodluck to me :)
How many questions are in total?
Jenny_chey, let us know. what answer you selected for layer 2 trouble tickets.
Passed today 923/1000
All tickets in sim are valid
Question 1 – 12 from the MCQ Nov 13th update were all on test
I had both the HSRP sim and BGP sim on my test
I had ticket 1,4 (case 2) 6,9,11 (ticket A) 12, 13, 14, 15, 17
Word to the wise: TICKET 6 Vlan Filter
Read the paragraph in bold that is at the bottom of the explanation for this ticket. I missed this last time because I could not find the right answer listed. I knew the answer, but I could not find it listed as an answer.
https://www.networktut.com/tshoot-ticket-6
@AOLL so how can we find it ?
When learning the multiple choice questions, is it enough to learn the current 12 questions at the top of the page, or is it better to learn every question on the entire page?
itook the exam yestarday and i scored 702
the problem is when i answer the 3rd question of a tikcet and i return back to previous question (2nd question) and then i go again to next question (the third question) i found that the question (third quetion) has changed.
is there anyone who ,faced the same issue ??
is it a bug ??
I had a ticketin the exam where Client A was on APIPA, in AWS1 the port FA 0/1(link to Client 1) WAS administratively down , when i clic on the ASW1 on the response 1 for the ticket , i didn’t had the right answer to chose , the port security was not configured in the port FA 0/1, there was not err disable.
my question is , can the port fa0/1(link to Client 1) in ASW1, be in Administratively down on a ticket?
please help
*********
when u refer to MCQ nov questions, do you mean only the 12 questions for updated on (13th-Nov-2019). what about other MCQ questions? TIA.
@John_Smith @ Anonymous
Took the exam 2 hours ago. Scored 1000.
Got ONLY MCQ from November (first 12), but you should learn the others too.
Got BGP simlet , HSRP simlet .
Got Ticket 1,4,5,6,9,11a,12,13,14,17.
Got 24 questions in total.
Everything is 1:1 , except the initially configured neighbor on the BGP simlet.
@AZER2017
In ticket 9 – Switchport trunk the fa1/0/1 port on ASW1 has ‘shutdown’ on it in the exam.
The answer there is to trunk allowed vlan 10,200 on the port channels and no shut the fa1/0/1.
@EASY
thank you
where can i find the MCQ nov questions
Last chance to get latest dump and take exam ASAP.
@Contact me to get share (VCE, PDF, PKT, UNL) with VCE tool player and all lab sim on EVE, Packet Tracer: saaau_holo(at)yaaahoo.com (replace aaa=a)
@@@D&D
Q1: Follwing the buttom-up TShoot methods, please order from step 1 to step 4 how to solve an issue with an IP phone:
Step 1. Confirm that enough power is received by using PoE
Step 2. Confirm that the phone is on the correct VLAN
Step 3. Verify the DHCP server configuration and option 150
Step 4. Verify the configuration the file from the TFTP serverver
Q2: Drag and drop questions to correct GRE configuration: (case 1)
R1 (10.1.1.1)=============R(CA)=============R2 (10.1.2.1)
R1(config)# interface Tunnel0
R1(config-if)# tunnel mode gre ip
R1(config-if)# ip address 10.1.3.1 255.255.255.0
R2(config)# interface Tunnel0
R2(config-if)# tunnel mode gre ip
R2(config-if)# ip address 10.1.3.2 255.255.255.0
Answer:
R1:
Configure the tunnel source to be 10.1.1.1
Configure the tunnel destination to be 10.1.2.1
R2:
Configure the tunnel destination to be 10.1.1.1
Configure the tunnel source to be 10.1.2.1
Q3: Drag and drop questions to correct GRE configuration (case 2):
R1 (192.1.1.1)=============R(CA)=============R2 (192.1.2.1)
R1(config)# interface Tunnel0
R1(config-if)# tunnel mode gre ip
R1(config-if)# ip address 10.1.1.1 255.255.255.0
R2(config)# interface Tunnel0
R2(config-if)# tunnel mode gre ip
R2(config-if)# ip address 10.1.1.2 255.255.255.0
Answer:
R1:
Configure the tunnel source to be 192.1.1.1
Configure the tunnel destination to be 192.1.2.1
R2:
Configure the tunnel destination to be 192.1.1.1
Configure the tunnel source to be 192.1.2.1
@@@MCQs
Q1: B. ipv6 traffic-filter INTERNET {in|out}
Q2: A. sh ip interface
D. sh ip traffic
Q3: A. Normal network traffic experiences asymmetric routing
Q4: E. 60 permit tcp host 2002:ABC:2000:2:2::2 host 2000:ABC:20:2:2::2 eq 22
Q5: A. set the exec-timeout 0 0 command on line con 0
Q6: A. EXSTART
Q7: D. DSW-01(config)#interface gig1/2
DSW-01(config-if)#spanning-tree cost 5
Q8: A. There are different VTP domain for S1 and S2
Q9: A. Recursive routing
Q10: A. On R2, change the tunnel source to 10.1.2.1
B.On R1, change the tunnel source to 10.1.1.1
Passed 9XX/1000
HSRP and BGP simlet VALID
MCQ 12Q
I just had an issue on DHCP ticket where
1. APIPA
2. DSW1 Helper is wrong address
3. ASW1 has port security
I am not sure but I answered DHCP. All dumps are valid,
Goodluck guys
Hi, Here you go. Just put “i” in start of my name and you will get download link
Passed 9XX/1000
HSRP and BGP simlet VALID
MCQ 12Q
I just had an issue on DHCP ticket where
1. APIPA
2. DSW1 Helper is wrong address
3. ASW1 has port security
I am not sure but I answered DHCP. All dumps are valid,
Goodluck guys
passed exam, everything here is valid. need to study ticket and have your own technique in finding the problematic device. don’t panic if it didn’t turn out the way you practiced it. try to check the error from the devices. don’t rushed to answer, make sure you click everything before you click next.
got nov mcq but much better to study all.
Good luck and let’s get it :D
Hi all passed today with 980. all troubleticket are valid here mcq also
.
Pass today 1000/1000
Questions were only from Nov 13, simlets and tickets are valid!
Where is Nov19 pdf for MCQ?