Multiple Choice Questions
May 8th, 2018
Go to comments
Question 1
Question 2
Question 3
Explanation
All of these can be modified: protocol, IP destination address, repeat count, Datagram size, Timeout, source address/interface, type of service, DF bit, Validate reply data, Data pattern, Loose, Strict, Record, Timestamp, Verbose, Sweep range of sizes.
Question 4
Question 5
Question 6
@had984 – It is available with the premium subscription.
Passed today 1K, 13th Nov questions are still valid.Just keep a eye on the BGP simulator, when i ran “no neighbor IBGP remote-as 64550” in the exam, it also removed “neighbor IBGP peer-group” and had to configure it again before configuring”neighbor IBGP remote-as 64520″
so it looked like below
R1(config-router)#no neighbor IBGP remote-as 64550
R1(config-router)#neighbor IBGP remote-as 64520
gave a error like need to configure group first
R1(config-router)#neighbor IBGP peer-group
R1(config-router)#neighbor IBGP remote-as 64520
hope that helps
cheers
Hi Ssay. I had exact same score. 835/100. I am certain that I answered all questions correctly. I have 15 years experience and was CCNP certified a number of years ago and this is my last step in re-certifying. Definitely something amiss.
guys, what do you get for the $20 membership? i dont see this explained anywhere, thx
Hi
For Question 10, should answer be D? Can someone pls confirm
Question 10
Two switches asking why DTP isn’t working one switch GigabitEthernet, other FastEthernet?
A. Because of a speed issue
B. Different VTP domains
C. SWA has a FastEthernet port
D. Because of dynamic desirable mode
Hi,
Same question regarding Q10. Answer is B, VTP Domains but I think it is wrong.
I would say D too: Because of dynamic desirable mode
Please confirm ;)
Question 10
Two switches asking why DTP isn’t working one switch GigabitEthernet, other FastEthernet?
A. Because of a speed issue
B. Different VTP domains
C. SWA has a FastEthernet port
D. Because of dynamic desirable mode
Think the answer is D also. The question relates to DTP which is used to negotiated a trunk link. VTP is used to propogate VLANS throughout the network.
B is correct answer for Q10 guys. See https://networkjutsu.com/dynamic-trunking-protocol/
DTP will not negotiate if there is a VTP domain mismatch.
Do you need to know all MCQ or JUST the 12 on the Nov 13 update?
@Anony
The TShoot dump is still valid today, but Cisco will change new Cisco Certifications in Feb 2020 so get latest dump and take exam ASAP.
@Contact me to get share (VCE, PDF, PKT) with VCE tool player and all lab sim on Packet Tracer: saaau_holo(at)yaaahoo.com (replace aaa=a)
Hi. In the Exam, once you choose the device that has the issue, are able to correct it after looking through the causes and not finding them valid?
I pass today:
All MCQ was from update 13 of November.
all ticket is valid – be careful in ticket with inside/outside NAT on R1. There is possible ping to WEB server from R1,R2,R3,R4 and client. This is bug. Only when you ping from R1 with source loopback0 or loop1 you will see problem.
both Simplets were in the exam. On BGP simplet you must configure from console. After use commmand sh ip BGP and compare with notes on this question.
Do you need to know all MCQ or just the Nov 13 update?
@dani just the new MCQ
Hi guys, are you able to re-share the link with the updated MCQ from 13th of November or point me to the right page please?
I did my TSHOOT on 8-Jan-2020 and failed. I got 825 but I am very certain that the answers I have provided will be able to pass the exam as the qns is per Nov 13 updates.
During the exam for every simulation question, the terminal will keep prompting me that there is a Adobe script error. I had informed the test center personnel and was told to click on “No” to proceed on every occurrence. Anyone experience this during his/her exam?
Something is very wrong. Anyone has successfully appealed the result? Thanks
LT. I scored 835 and failed. i also categorically can say all my answers were correct as per Nov 13 document. I have been told appealing is a waste of time so am resitting .
I failed the test today but MCQ are still vaild on 13Nov multiple choice -question. I keep getting
repeated questions,when all the routers and DSWs ping the server which ticket should suspect?
My failure came from these questions
thanks guys for sharing :D i cannot belive that 8 shared experience nice :D
and thanks for info
I FAILED ON 13DEC, WITH 804. 100% TO ALL CATEGORIES AND 29% TO L2 TECHNOLOGIES. I WAS CORRECT TO EVERY QUESTION. I SEND EMAILS TO CISCO BUT THEY IGNORED ME. SEND EMAILS TO THEM!!
Hello wedgym
I have a questions, how you know which tecnology is in each ticket? example:
Ticket 1 is PV6 OSPF touting en R2
Ticket 2 is Gre tunnel R3
I am waiting for your comments
Regards!
Hello @wedgym
I have a questions, how you know which tecnology is in each ticket? example:
Ticket 1 is PV6 OSPF touting en R2
Ticket 2 is Gre tunnel R3
I am waiting for your comments
Regards!
@LT – I have managed to do it once when my PC crashed during the test – Cisco provided me with a voucher I could use for any Associate or Professional level exam. Because there was a problem with you hardware/software, I would definitely try that especially if you reported it to the member of staff in the test center and they have CCTV footage which can confirm this.
Guys – where can I find the link for dumps with MCQs (13Nov)
I pass my tshoot exam today 980/1000. ALL MCQ for 13 NOv is valid. ALL ticket is valid. Need nothing else. Thanks Networktut. Very good for sure.
Sorry i forget. I also have SIM BGP and HSRP.
For SIM BGP just need theses few commands :
conf t
router BGP 64520
no neighbor 209.165.277.2 remote-as 64525
neighbor 209.165.201.2 remote-as 64525
neighbor IBGP remote-as 64520
end
Hope Help U.
“kaizoku oni ore wa naru” #ONEPIECE
saaau_holo(at)yaaahoo.com (replace aaa=a) is Bot, don’t send him mail.
@Anonymous
Could you please share the MCQ
Thank you
Anyone is able to re-share the link with the MCQ please?
Hi @Anton
I have a questions, how you know which tecnology is in each ticket? example:
Ticket 1 is PV6 OSPF touting en R2
Ticket 2 is Gre tunnel R3
I am waiting for your comments
Regards!
I scored 835 and failed too. All my grades are %100 except L3 technologies. It is %68.
All questions here existed. I know what i did in the exam and i did same answers mentioned here.
I think some answers are incorrect especially some mcq i guess. For your information.